Ping Lv¹, Jiufei Liu², Mengran Xu^3,*, Hui Tian^3,4, Huajie Liu³, Yuhuan Bu³, Zhuang Cai³, Junfeng Qu⁵

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.11, pp. 2907-2921, 2023, DOI:10.32604/fdmp.2023.029304 - 18 September 2023

Abstract Cementing carbonate reservoirs is generally a difficult task. The so-called thixotropic cement slurry has gained considerable attention in this regard as it can help to fix some notable problems. More precisely, it can easily fill the leakage layer; moreover, its gelling strength can grow rapidly when pumping stops, thereby increasing the resistance to gas channeling, effectively preventing this undesired phenomenon in many cases. High-temperature thixotropic cement slurry systems, however, are still in an early stage of development and additional research is needed to make them a viable option. In the present study, using a self-developed… More >

Yudong Tian^1,2, Gonghui Liu¹, Yue Qi^1,2,*, Jun Li^1,3, Yan Xi^1,4, Wei Lian^1,3, Xiaojie Bai², Penglin Liu¹, Xiaoguang Geng²

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.11, pp. 2837-2845, 2023, DOI:10.32604/fdmp.2023.028805 - 18 September 2023

Abstract Organic rich dark shale of Q Formation can be found in many areas (e.g., in the North of S Basin). The shale target stratum is easy to hydrate and often undergoes spallation. Therefore, centering the casing in the horizontal section of the irregular borehole is relatively difficult. Similarly, achieving a good cement flushing efficiency under complex borehole conditions is a complex task. Through technologies such as centralizer, efficient preflushing, multi-stage flushing and ductile cement slurry, better performances can be achieved. In this study, it is shown that the cementing rate in the DY2H horizontal section More >

Yanjun Li¹, Wandong Zhang¹, Jiang Wu¹, Yuhao Yang¹, Chao Zhang¹, Huanqiang Yang^2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.5, pp. 1237-1248, 2023, DOI:10.32604/fdmp.2022.023147 - 30 November 2022

Abstract Air channeling in the annulus between the casing and the cement sheath and/or between the cement sheath and formation is the main factor affecting the safe operation of natural gas wells at high temperatures and pressures. Prevention of this problem requires, in general, excellent anti-channeling performances of the cement sheath. Three methods to predict such anti-channeling performances are proposed here, which use the weightless pressure of cement slurry, the permeability of cement stone and the volume expansion rate of cement sheath as input parameters. Guided by this approach, the anti-channeling performances of the cement slurry More >

Kunhong Lv, Zhiqiang Huang^*, Xingjie Ling, Xueqin Xia

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.5, pp. 1307-1318, 2022, DOI:10.32604/fdmp.2022.020294 - 27 May 2022

Abstract The weight loss of cement slurry is the main cause of early annular air channeling and accurate experimental evaluation of the law of loss change is the key to achieve compression stability and prevent this undesired phenomenon. Typically, tests on the pressure loss of cement slurry are carried out for temperature smaller than 120°C, and this condition cannot simulate effectively the situation occurring in high temperature wells. For this reason, in this study a series of experimental tests have been conducted considering a larger range of temperatures, different retarders and fluid loss additives. The results More >

Hexing Liu¹, Yi Huang¹, Jinlong Zheng¹, Ye Tian¹, Mengran Xu^2,*, Huajie Liu²

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.4, pp. 999-1013, 2022, DOI:10.32604/fdmp.2022.020059 - 06 April 2022

Abstract The application of polycarboxylic acid as a fluid loss additive for cement (i.e., a substance specifically designed to lower the volume of filtrate that passes through the cement) can prolong the thickening time of cement slurries. Given the lack of data about the effects of carboxylic acid monomers as possible components for the additives traditionally used for oil-well cement, in this study different cases are experimentally investigated considering different types of these substances, concentrations, temperatures, and magnesium ion contamination. The results demonstrate that itaconic acid has a strong retarding side effect, while maleic and acrylic More >