Ignatius Riyadi Mardiyanto¹, Jangkung Raharjo^2,*, Sri Utami¹, Wahyu Budi Mursanto¹, Agoeng Hardjatmo Rahardjo¹

Energy Engineering, Vol.120, No.6, pp. 1295-1305, 2023, DOI:10.32604/ee.2023.027756

Abstract Utilization of Micro Hydro Power Plant at the Gunung Halu case study type run-off the river is a household use only in the afternoon, around 5 pm until bedtime at about 10 pm. Therefore, more than 75% of the energy is lost. This case study lost power which can be used as a by-product, such as for drying coffee beans. In this case study, a design was carried out to obtain by-products and improve power quality in the electrical system. In addition, they complain about the poor quality of power controlled by frequency using Triac-Based Electronic Dummy Load Control. The… More > Graphic Abstract

Resa Martha^1,2, Mahdi Mubarok^1,2, Wayan Darmawan², Wasrin Syafii², Stéphane Dumarcay¹, Christine Gérardin Charbonnier¹, Philippe Gérardin^1,*

Journal of Renewable Materials, Vol.9, No.3, pp. 399-449, 2021, DOI:10.32604/jrm.2021.014286

Abstract As a tropical archipelagic country, Indonesia’s forests possess high biodiversity, including its wide variety of wood species. Valorisation of biomolecules released from woody plant extracts has been gaining attractive interests since in the middle of 20th century. This paper focuses on a literature review of the potential valorisation of biomolecules released from twenty wood species exploited in Indonesia. It has revealed that depending on the natural origin of the wood species studied and harmonized with the ethnobotanical and ethnomedicinal knowledge, the extractives derived from the woody plants have given valuable heritages in the fields of medicines and pharmacology. The families… More >

Febrina Dellarose Boer^1,2,3, Jérémy Valette^1,2, Jean-Michel Commandré^1,2, Mériem Fournier^3,4, Marie-France Thévenon^1,2,*

Journal of Renewable Materials, Vol.9, No.1, pp. 97-117, 2021, DOI:10.32604/jrm.2021.013147

Abstract Sugarcane bagasse was pyrolyzed using a laboratory fixed bed reactor to produce char and its by-product (pyrolysis liquid). The pyrolysis experiments were carried out using different temperatures (400°C and 500°C), heating rate (1 °C/min and 10 °C/min), and holding time (30 min and 60 min). Char was characterized according to its thermal properties, while the pyrolysis liquid was tested for its anti-fungal and anti-termite activities. Pyrolysis temperature and heating rate had a significant influence on the char properties and the yield of char and pyrolysis liquid, where a high-quality char and high yield of pyrolysis liquid can be obtained at… More >

Morgan Chabannes^1,2,*, Frédéric Becquart^1,2, Nor-Edine Abriak^1,2

Journal of Renewable Materials, Vol.7, No.9, pp. 855-863, 2019, DOI:10.32604/jrm.2019.06779

Abstract The return to old building methods by mixing crop by-products with mineral binders is arousing great interest in Europe since about 25 years. The use of these bio-aggregates based materials for the design of building envelopes is a valuable opportunity to deal with increasingly demanding thermal regulations. In addition, the regulatory framework is moving towards reducing the overall car-bon footprint of new buildings. Some traditional and historic buildings are based on timber framing with earth-straw as infill material for instance. Hemp concrete is a bio-based material that can be manually tamped in timber stud walls or more recently in the… More >

Ibtissem Moussa¹, Noureddine Baaka¹, Ramzi Khiari^1,2,3*, Ali Moussa⁴, Gérard Mortha³, Mohamed Farouk Mhenni¹

Journal of Renewable Materials, Vol.6, No.1, pp. 55-67, 2018, DOI:10.7569/JRM.2017.634141

Abstract Natural dyes have become an interesting subject of study because of their better ecological properties in comparison to their synthetic counterparts. This article concerns the dyeing of wool, silk, and polyamide fabrics with natural dyes extracted from almond shells and stems. The developed method of dyeing by these extracts is interesting and very attractive for several reasons: firstly, the extracts used are the black liquor discharged from the industries of delignification, which is a chemical process for removing lignin from agricultural wastes to produce a cellulosic fiber; (ii) these natural dyes are renewable and available in large quantities; (iii) this… More >

Louis C. Muller^1*, Sanette Marx¹, Hermanus C.M. Vosloo²

Journal of Renewable Materials, Vol.5, No.1, pp. 67-80, 2017, DOI:10.7569/JRM.2016.634130

Abstract This work reports a study of polyol synthesis through liquefaction of technical lignins in crude glycerol by means of 1H and 31P NMR spectroscopy. The polyols are intended for preparation of polyurethane foam; thus, it is important to know how different lignin types as well as crude glycerol influence and contribute to the final polyol hydroxyl contents. Polyols prepared from organosolv lignin, kraft lignin and lignosulphonate had hydroxyl numbers suitable for rigid foam of 435, 515 and 529 mgKOH/g, respectively. The polyols differed in composition with glycerol, showing significant variation. During liquefaction the glycerol content was mostly reduced through bonding… More >

Nuria Burgos, Arantzazu Valdés, Alfonso Jiménez^*

Journal of Renewable Materials, Vol.4, No.3, pp. 165-177, 2016, DOI:10.7569/JRM.2016.634108

Abstract In this study we provide an overview of the latest developments on the extraction, production, modification and applications of fruit residues and by-products in the formation of protein-based biopolymers, in particular for the formulation of edible films. Our aim was mainly to demonstrate the highly transdisciplinary character of these topics by giving an overview of the main developments and research topics in the chemistry and engineering aspects of protein-based biopolymers. These innovative raw materials have been evaluated for the production of biomaterials to be used in some key sectors, such as food packaging. More >