Haojie Lian^1,2, Leilei Chen^2,3, Xiao Lin⁴, Wenchang Zhao^5,*, Stephane P. A. Bordas^6,7, Mingdong Zhou^8,*

CMES-Computer Modeling in Engineering & Sciences, Vol.131, No.1, pp. 1-18, 2022, DOI:10.32604/cmes.2022.019705 - 24 January 2022

Abstract This paper proposes a novel optimization framework in passive control techniques to reduce noise pollution. The geometries of the structures are represented by Catmull-Clark subdivision surfaces, which are able to build gap-free Computer-Aided Design models and meanwhile tackle the extraordinary points that are commonly encountered in geometric modelling. The acoustic fields are simulated using the isogeometric boundary element method, and a density-based topology optimization is conducted to optimize distribution of sound-absorbing materials adhered to structural surfaces. The approach enables one to perform acoustic optimization from Computer-Aided Design models directly without needing meshing and volume parameterization, More >

Xuan Peng^1,*, Haojie Lian^2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.130, No.1, pp. 513-542, 2022, DOI:10.32604/cmes.2022.017410 - 29 November 2021

Abstract This work presents some numerical aspects of isogeometric boundary element methods (IGABEM). The behavior of hyper-singular and nearly-singular integration is first explored on the distorted NURBS surface. Several numerical treatments are proposed to enhance the quadrature in the framework of isogeometric analysis. Then a numerical implementation of IGABEM on the trimmed NURBS is detailed. Based on this idea, the surface crack problem is modeled incorporation with the phantom element method. The proposed method allows the crack to intersect with the boundary of the body while preserving the original parametrization of the NURBS-based CAD geometry. More >

Haojie Lian¹, Zhongwang Wang^2,3,*, Haowen Hu³, Shengze Li⁴, Xuan Peng⁵, Leilei Chen^2,3

CMES-Computer Modeling in Engineering & Sciences, Vol.128, No.1, pp. 1-20, 2021, DOI:10.32604/cmes.2021.016775 - 28 June 2021

Abstract This paper presents a novel framework for stochastic analysis of linear elastic fracture problems. Monte Carlo simulation (MCs) is adopted to address the multi-dimensional uncertainties, whose computation cost is reduced by combination of Proper Orthogonal Decomposition (POD) and the Radial Basis Function (RBF). In order to avoid re-meshing and retain the geometric exactness, isogeometric boundary element method (IGABEM) is employed for simulation, in which the Non-Uniform Rational B-splines (NURBS) are employed for representing the crack surfaces and discretizing dual boundary integral equations. The stress intensity factors (SIFs) are extracted by M integral method. The numerical examples More >

Shige Wang¹, Zhongwang Wang¹, Leilei Chen¹, Haojie Lian^2,3,*, Xuan Peng⁴, Haibo Chen⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.124, No.2, pp. 585-604, 2020, DOI:10.32604/cmes.2020.09904 - 20 July 2020

Abstract The paper applied the isogeometric boundary element method (IGABEM) to thermoelastic problems. The Non-Uniform Rational B-splines (NURBS) used to construct geometric models are employed to discretize the boundary integral formulation of the governing equation. Due to the existence of thermal stress, the domain integral term appears in the boundary integral equation. We resolve this problem by incorporating radial integration method into IGABEM which converts the domain integral to the boundary integral. In this way, IGABEM can maintain its advantages in dimensionality reduction and more importantly, seamless integration of CAD and numerical analysis based on boundary More >

Jin Li¹, Ji-ming Wu², De-hao Yu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.42, No.2, pp. 151-176, 2009, DOI:10.3970/cmes.2009.042.151

Abstract The trapezoidal rule for the computation of Hadamard finite-part integrals in boundary element methods is discussed, and the asymptotic expansion of error function is obtained. A series to approach the singular point is constructed and the convergence rate is proved. Based on the asymptotic expansion of the error functional, algorithm with theoretical analysis of the generalized extrapolation are given. Some examples show that the numerical results coincide with the theoretic analysis very well. More >

Fabian M. E. Duddeck¹

CMES-Computer Modeling in Engineering & Sciences, Vol.16, No.1, pp. 1-14, 2006, DOI:10.3970/cmes.2006.016.001

Abstract In general, the use of Boundary Element Methods (BEM) is restricted to physical cases for which a fundamental solution can be obtained. For simple differential operators (e.g. isotropic elasticity) these special solutions are known in their explicit form. Hence, the realization of the BEM is straight forward. For more complicated problems (e.g. anisotropic materials), we can only construct the fundamental solution numerically. This is normally done before the actual problem is tackled; the values of the fundamental solutions are stored in a table and all values needed later are interpolated from these entries. The drawbacks… More >

Paola Gardano¹, Peter Dabnichki^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.15, No.2, pp. 87-98, 2006, DOI:10.3970/cmes.2006.015.087

Abstract The work presents a numerical simulation of hydrodynamic forces generated in front crawl swimming. The three dimensional Laplace's equation is used for the analysis of the flow around a moving body in an infinite domain and considers the effect of the added mass and the acceleration on the hydrodynamic forces (Drag and Lift) generated by the interaction between the flow and the body at different geometric configurations of the arm -- variable elbow angle. Boundary Element Method (BEM) was used to obtain the solution of the three dimensional equation numerically. The aim of the work… More >

P. A. C. Porto¹, A. B. Jorge¹, G. O. Ribeiro²

CMES-Computer Modeling in Engineering & Sciences, Vol.10, No.1, pp. 65-78, 2005, DOI:10.3970/cmes.2005.010.065

Abstract This work deals with a numerical solution technique for the self-regular gradient form of Green's identity, the flux boundary integral equation (flux-BIE). The required C^1,α inter-element continuity conditions for the potential derivatives are imposed in the boundary element method (BEM) code through a non-symmetric variational formulation. In spite of using Lagrangian C⁰ elements, accurate numerical results were obtained when applied to heat transfer problems with singular or quasi-singular conditions, like boundary points and interior points which may be arbitrarily close to the boundary. The numerical examples proposed show that the developed algorithm based on the self-regular More >

Satya N. Atluri¹, Shengping Shen¹

CMES-Computer Modeling in Engineering & Sciences, Vol.3, No.1, pp. 11-52, 2002, DOI:10.3970/cmes.2002.003.011

Abstract A comparison study of the efficiency and accuracy of a variety of meshless trial and test functions is presented in this paper, based on the general concept of the meshless local Petrov-Galerkin (MLPG) method. 5 types of trial functions, and 6 types of test functions are explored. Different test functions result in different MLPG methods, and six such MLPG methods are presented in this paper. In all these six MLPG methods, absolutely no meshes are needed either for the interpolation of the trial and test functions, or for the integration of the weak-form; while other… More >