Xiangmiao Wan, Yan Tan^*, Xiong Long

Structural Durability & Health Monitoring, Vol.18, No.4, pp. 505-524, 2024, DOI:10.32604/sdhm.2024.049363 - 05 June 2024

Abstract In this study, we assessed the impact of substituting natural fine aggregates with municipal solid waste incineration bottom ash (MSWI-BA) in steel fiber (SF)-reinforced concrete on its compressive properties post high-temperature exposure. The concrete specimens incorporating MSWI-BA as the fine aggregate and SFs for reinforcement underwent uniaxial compression tests after exposure to high temperatures. Through the tests, we investigated the impact of high-temperature exposure on mechanical properties, such as mass loss rate, stress-strain full curve, compressive strength, peak strain, elastic modulus, and so on, over different thermostatic durations. The analysis revealed that with the increasing… More >

John Freddy Gelves-Díaz^1,*, Ludovic Dorkis², Richard Monroy-Sepúlveda¹, Sandra Rozo-Rincón¹, Yebrail Alexis Romero-Arcos¹

Journal of Renewable Materials, Vol.11, No.10, pp. 3769-3787, 2023, DOI:10.32604/jrm.2023.029270 - 10 August 2023

Abstract Secondary lignocellulosic biomass has proved to be useful as an energy source through its oxidation by means of combustion processes. In accordance with the above, in this paper, we wanted to study the ash from urban pruning residues that are generated in cities in the Neotropics. Species such as Licania tomentosa, Azadirachta indica, Ficus benjamina, Terminalia catappa, Leucaena leucocephala, Prosopis juliflora and Pithecellobium dulce were selected because they have been previously studied and showed potential for thermal energy generation. These materials were calcined in an oxidizing atmosphere and characterized by X-ray diffraction and fluorescence, scanning electron microscopy with microchemistry, BET surface area,… More > Graphic Abstract

Wenqi Zhao¹, Wenbin Sun^1,2,3,*, Zhenbo Cao¹, Jianbang Hao¹

Journal of Renewable Materials, Vol.11, No.7, pp. 3073-3089, 2023, DOI:10.32604/jrm.2023.026409 - 05 June 2023

Abstract Mine grouting reinforcement and water plugging projects often require large amounts of grouting materials. To reduce the carbon emission of grouting material production, improve the utilization of solid waste from mining enterprises, and meet the needs of mine reinforcement and seepage control, a double-liquid grouting material containing a high admixture of coal gangue powder/bottom ash geopolymer was studied. The setting time, fluidity, bleeding rate, and mechanical properties of grouting materials were studied through laboratory tests, and SEM analyzed the microstructure of the materials. The results show that the total mixture of calcined gangue does not More >

Peng Zhang¹, Dongsheng Shi^1,*, Ping Han^1,2, Wenchao Jiang^1,3

Journal of Renewable Materials, Vol.11, No.2, pp. 669-688, 2023, DOI:10.32604/jrm.2022.022192 - 22 September 2022

Abstract The destruction of concrete building materials in severely cold regions of the north is more severely affected by freeze-thaw cycles, and the relationship between the mechanical properties and pore structure of concrete with fine aggregate from municipal solid waste (MSW) incineration bottom ash after freeze-thaw cycles is analyzed under the degree of freeze-thaw hazard variation. In this paper, the gray correlation method is used to calculate the correlation between the relative dynamic elastic modulus, compressive strength, and microscopic porosity parameters to speculate on the most important factors affecting their changes. The GM (1,1) model was… More >

Prince Momar Gueye^1,2,*, Siham Kamali-Bernard², Dame Keinde¹, Fabrice Bernard², Vincent Sambou¹

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.6, pp. 1581-1593, 2022, DOI:10.32604/fdmp.2022.022165 - 27 June 2022

Abstract Omni Processors (OP) are machines which use sludge as a fuel to generate electricity and clean water, but create ash at the same time. In the present study, fly ash and bottom ash are investigated as materials for potential reuse in the construction field. First, the granular size, density and Blaine finesse are determined. Then, the chemical composition and microstructure are obtained by means of X-ray fluorescence and Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS), respectively. Finally, ashes reactivity is determined by two chemical methods (modified Chapelle test, bound water content R3) and a mechanical method More >