Yan Liu¹, Yanfei Guo¹, Xufeng Sun^1,*, Meng Gong²

Journal of Renewable Materials, Vol.8, No.9, pp. 1111-1127, 2020, DOI:10.32604/jrm.2020.09575 - 03 August 2020

Abstract Poplar Laminated Veneer Lumber (Poplar LVL) is a new type of engineering materials with high strength, good reliability and small variability. Poplar LVL is manufactured from the fast-growing poplar, which is widely used in packaging, furniture and others, however, is rarely adopted in construction. In order to explore the feasibility of poplar LVL trusses in construction of roof, four 4.5-m-span Fink-and-Howe trusses were designed and assembled, which were made of poplar LVL with bolted- and tooth-plated connections. Vertical static loading on the upper chord joints of a truss was imposed by self-balancing test device. The… More >

Chenxiao Su, Haibei Xiong^*

Structural Durability & Health Monitoring, Vol.14, No.1, pp. 81-94, 2020, DOI:10.32604/sdhm.2020.08221 - 01 March 2020

Abstract In order to explore a kind of high-strength, earthquake-resistant, economical and suitable connection, 4 groups of cross-laminated timber wall-to-floor and wall-to-wall bolted connections were tested under monotonic and cyclic loading. The deformation characteristics and failure modes of the cross-laminated timber wall-to-floor and wall-to-wall bolted connections were exploited. Load-slip curves, bearing capacity, yielding point, stiffness and ductility of each group of specimens were analyzed. The test results indicate that the loading process of cross-laminated timber bolted connections under tension can be categorized as five stages, namely the elastic stage, the slip stage, the embedding stage, the… More >