Peyman Ahmadi^1,*, Davood Efhamisisi^1,*, Marie-France Thévenon^2,3, Hamid Zarea Hosseinabadi¹, Reza Oladi¹, Jean Gerard^2,3

Journal of Renewable Materials, Vol.12, No.10, pp. 1715-1728, 2024, DOI:10.32604/jrm.2024.054076 - 23 October 2024

Abstract Sugarcane bagasse is an agro-waste that could replace timber resources for the production of bio-composites. Composite boards such as particleboard offer an issue for the use and recycling of poor quality timber, and these engineered products can overcome some solid wood limitations such as heterogeneity and dimension. Bagasse offers an alternative to wood chips for particleboard production but present some disadvantages as well, such as poor physico-mechanical properties. To address these issues, bagasse fibers were treated with an innovative natural resin formulated with tannin and furfural. Impregnated particles with different concentrations of resin (5%, 10%,… More > Graphic Abstract

Qahtan A. Hamad¹, Hanaa A. Al-Kaisy¹, Mohanad N. Al-Shroofy¹, Noor K. Faheed^2,*

Journal of Renewable Materials, Vol.11, No.4, pp. 1601-1612, 2023, DOI:10.32604/jrm.2023.023213 - 01 December 2022

Abstract This work aims to prepare chitosan (CS)-based coated layers, CS (10 wt% nanosilver/90 wt% CS, 10 wt% biotin/90 wt% CS, and 5 wt% nanosilver–5 wt% biotin)/90 wt% CS coatings are prepared, onto pure Ti substrate. The surface morphology of the novel CS composite coating was studied using field emission scanning electron microscopy, atomic force microscopy (AFM), Fourier transforms infrared (FTIR) and wettability test. Results show that the addition of (biotin, nanosilver) 5 Vol.% improves the properties of composite materials. Using different particles’ scale size aid in improving the combinations in the alginate, producing a dual… More > Graphic Abstract

Arunjunai Raj Mahendran^*, Günter Wuzella, Stefan Pichler, Herfried Lammer

Journal of Renewable Materials, Vol.10, No.6, pp. 1505-1516, 2022, DOI:10.32604/jrm.2022.017835 - 20 January 2022

Abstract The objective of this work is to carry out the chemical treatment for the hemp fabrics in a closed vacuum system and to prepare bio-based composites using treated hemp fabrics. The change in surface tension of the treated fabrics was measured using contact angle measurement and the wetting behavior using a tensiometer. Bio-based composites were fabricated using bio-based epoxy resin and different chemically treated fabrics. The flexural strength and dynamic water absorption behavior of the composites were characterized. The acetylated fabrics showed very good wetting behavior, and the contact angle values were marginally low compared More > Graphic Abstract

Ke Shi^1,2, Luyang Wang^1,2, Ruige Qi^1,2, Chunxia He^1,2,*

Journal of Renewable Materials, Vol.10, No.5, pp. 1257-1268, 2022, DOI:10.32604/jrm.2022.017891 - 22 December 2021

Abstract This work was aim to prepare a packing material from natural resources to reduce the environment pollution caused by plastics. Four bio-adhesives (guar gum, sodium alginate, agar and chitosan) were combined with lotus leaf fibers to prepare degradable composites, respectively. The mechanical properties, moisture absorption profiles and the thermal conductivity of the composites were studied and the cross section morphology and the thermal properties of the composites were analyzed. The Fourier-transform infrared spectroscopy (FTIR) results showed that the polar groups such as –OH and –COO^– in bio-adhesives can form hydrogen bond with –OH in lotus leaf More >

Sami Allagui^1,2,*, Abderrahim El Mahi¹, Jean-Luc Rebiere¹, Moez Beyaoui², Anas Bouguecha², Mohamed Haddar²

Journal of Renewable Materials, Vol.9, No.4, pp. 695-721, 2021, DOI:10.32604/jrm.2021.013586 - 01 February 2021

Abstract This manuscript deals with the effects of recycling on the static and dynamic properties of flax fibers reinforced thermoplastic composites. The corresponding thermoplastic used in this work is Elium resin. It’s the first liquid thermoplastic resin that allows the production of recycled composite parts with promising mechanical behavior. It appeared on the resin market in 2014. But until now, no studies were available concerning how it can be recycled and reused. For this study, a thermocompression recycling process was investigated and applied to Elium resin. Flax fiber-reinforced Elium composites were produced using a resin infusion… More >

Haina¹, Sagheer Gul^1,*, Muhammad Awais¹, Saira Jabeen², Muhammad Farooq³

Journal of Renewable Materials, Vol.8, No.10, pp. 1305-1326, 2020, DOI:10.32604/jrm.2020.010037 - 31 August 2020

Abstract This review efficiently covers the research progress in the area of polymer bio composites in perspective of the modern-day renewable materials. In the last decade, attraction towards the bio-composite based systems has been the topic of interest due to their potential as a substitute of conventional materials produced in important manufacturing industries. Recently, preparation of biocompatible and biodegradable polymer composites is an important achievement as an alternative of petrochemical based renewable products. Successful production of eco-friendly bio-composite materials have been achieved with natural fibers viz jute, bamboo, hair, flex, wool, silk and many others instead… More >

S. Anup¹, S. M. Sivakumar², G. K. Suraishkumar³

CMES-Computer Modeling in Engineering & Sciences, Vol.18, No.2, pp. 145-154, 2007, DOI:10.3970/cmes.2007.018.145

Abstract Bone is a hierarchical bio-composite, and has a staggered arrangement of soft protein molecules interspaced with hard mineral platelets at the fine ultrastructure level. The investigation into reasons for high fracture toughness of bio-composites such as bone requires consideration of properties at the different levels of hierarchy. In this work, the analysis is done at the continuum level, but the properties used are appropriate to that of the level considered. In this way, the properties at the fine ultrastructure level of bone is considered in the stress distribution analysis of a platelet adjacent to the More >