Xuhang Lin¹, Haibo Chen^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.09388

Abstract As an important and useful tool for reducing noise, the sound barrier is of practical significance. The sound barrier has different noise reduction effects for different sizes, shapes and properties of the sound absorbing material. Liu et al. [1] have performed shape optimization of sound barriers by using isogeometric boundary element method and method of moving asymptotes (MMA). However, in engineering practice, it is difficult to determine some parameters accurately such as material properties, geometries, external loads. Therefore, it is necessary to consider these uncertainty conditions in order to ensure the rationality of the numerical calculation of engineering problems. In… More >

Pan Li¹, Xiaochao Jin¹, Pin Lv¹, Xueling Fan^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.010540

Abstract Refurbishment of thermal barrier coating (TBC) has become a valuable technique to prolong the service life of high-temperature components. In this work, the effect of refurbishment process on the oxidation behaviors of TBC was investigated. Before recoating, the soft chemical stripping method was used to remove TBC from DD6 single-crystal superalloy. The results showed that a certain amount of IDZ layer with Cr-rich would be retained in the DD6 superalloy substrate after coating removal. The characteristics of the β phases change from the elongated grain shapes and a high aspect ratio in the ordinary specimens to the equiaxed shape in… More >

Changyao Chen¹, Jialei Song^1,*, Ling Yin¹, Yizhe Li², Zheng Yuan², Yuhan Li³

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.09859

Abstract Bird can switch between high maneuverability and high stability due to its ability to substantially morph wings and tail. Tail as an auxiliary lift surface, plays an important role on lift and drag production and also significantly affects the longitudinal stability. In this study, we reconstruct a high-fidelity barn owl model using the point cloud of its surface obtained from high-speed photogrammetry, and simulate the fluid dynamics using a commercial software. By virtually manipulating the tail to a series of postures, we analyze the aerodynamics and static stability for each tail posture, investigating the strategy to adjust the stability during… More >

XIAO-JUN ZHOU^1,*, YU-WEI TIAN¹, RUI-HAN LI²

BIOCELL, Vol.47, No.8, pp. 1907-1913, 2023, DOI:10.32604/biocell.2023.030191

Abstract Background: Acer griseum Pax is an endangered species endemic to China with both ornamental and economic value. However, the lack of information on its genome size and characteristics hinders further work at the genome level. Methods: This paper applied bioinformatics methods to predict the characteristics and patterns of the A. griseum genome, providing an important basis for formulating its whole-genome sequencing scheme. This study also characterized the simple sequence repeats (SSRs) of A. griseum, laying the foundation for the development and application of genome-wide SSR markers. In this study, PE150 sequencing was performed by the BGI MGISEQ platform, and the… More >

LONGSHENG FU¹, JINFANG HU¹, FENG SHAO², YAOQI WU¹, WEI BAI³, MINGJIN JIANG³, HAO CHEN⁴, LIHUA CHEN², YANNI LV^1,*

BIOCELL, Vol.47, No.8, pp. 1869-1883, 2023, DOI:10.32604/biocell.2023.028602

Abstract Background: Biochanin A is an excellent dietary isoflavone that has the concomitant function of both medicine and foodstuff. The attenuation function of biochanin A on blood-brain barrier (BBB) damage induced by cerebral ischemia-reperfusion remains unclear. Methods: C57BL/6 mice were subjected to 1 h middle cerebral artery occlusion (MCAO) followed by 24 h reperfusion. The infarct volume of the brain was stained by TTC, while leakage of the brain was quantitatively stained by Evans blue, and the neurologic deficit score was measured. Microglial-induced morphologic changes were observed via immunofluorescence staining, and rolling and adhering leukocytes in venules were observed via two-photon… More >

Junling Qiu^*, Huihui Sun, Shuya Wang

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.3, pp. 2077-2109, 2023, DOI:10.32604/cmes.2023.027353

Abstract As indispensable components of superconducting circuit-based quantum computers, Josephson junctions determine how well superconducting qubits perform. Reverse Monte Carlo (RMC) can be used to recreate Josephson junction’s atomic structure based on experimental data, and the impact of the structure on junctions’ properties can be investigated by combining different analysis techniques. In order to build a physical model of the atomic structure and then analyze the factors that affect its performance, this paper briefly reviews the development and evolution of the RMC algorithm. It also summarizes the modeling process and structural feature analysis of the Josephson junction in combination with different… More >

Stepan Konev¹, Victor A. Eremeyev^2,3, Hamid M. Sedighi^4,5,*, Leonid Igumnov², Anatoly Bragov², Aleksandr Konstantinov², Ayaulym Kuanyshova¹, Ivan Sergeichev¹

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.3, pp. 2149-2161, 2023, DOI:10.32604/cmes.2023.028179

Abstract This article presents the results of experimental studies concerning the dynamic deformation and failure of a unidirectional carbon fiber reinforced plastic (T700/LY113) under compression. The test samples were manufactured through the filament winding of flat plates. To establish the strain rate dependencies of the strength and elastic modulus of the material, dynamic tests were carried out using a drop tower, the Split Hopkinson Pressure Bar method, and standard static tests. The samples were loaded both along and perpendicular to the direction of the reinforcing fiber. The applicability of the obtained samples for static and dynamic tests was confirmed through finite… More >

Muzi Li^*

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.3, pp. 2465-2493, 2023, DOI:10.32604/cmes.2023.026827

Abstract Modular construction as an innovative method aids the construction industry in transforming to off-site construction production with high efficiency and environmental friendliness. Despite the obvious advantages, the uptake of modular construction is not booming as expected. However, previous studies have investigated and summarized the barriers to the adoption of modular construction. In this research, a Large-Scale Group Decision Making (LSGDM)- based analysis is first made of the severity of barriers to modular construction adoption from the perspective of construction stakeholders. In addition, the Technology-Organization-Environment (TOE) framework is utilized to identify the barriers based on three contexts (technology, organization, and environment).… More >

Mojtaba Kordrostami¹, Ali Akbar Ghasemi-Soloklui¹, Mohammad Anwar Hossain^2,*, Mohammad Golam Mostofa^3,4,*

Phyton-International Journal of Experimental Botany, Vol.92, No.9, pp. 2713-2736, 2023, DOI:10.32604/phyton.2023.030372

Abstract Numerous plant species, particularly those that can accumulate selenium (Se) and silicon (Si), benefit from these essential micronutrients. Se and Si accumulation in plants profoundly affects several biochemical reactions in cells. Understanding how plants react to Se/Si enrichment is crucial for ensuring adequate dietary Se/Si intake for humans and animals and increasing plant tolerance to environmental stressors. Several studies have shown that Se/Si-enriched plants are more resistant to salinity, drought, extreme temperatures, UV radiation, and excess metalloids. The interplay between Se/Si in plants is crucial for maintaining growth and development under normal conditions while providing a critical defense mechanism against… More >

Kevin W. Irick^*

Frontiers in Heat and Mass Transfer, Vol.8, pp. 1-7, 2017, DOI:10.5098/hmt.8.2

Abstract The Single-sided Guarded Hot Plate Method for Comparative Testing of Thermal Radiation Barriers in Vacuum was used to evaluate the performance of a variety of aerogel insulation specimens manufactured by Aspen Aerogels® against one another and against multi-layer insulation (MLI). Testing at the Air Force Research Laboratory (AFRL) shows that the effective thermal resistance, R_e, of all tested aerogel specimens are virtually bounded by the performance of 5-layer and 10-layer MLI specimens over a mean specimen temperature, T_m, range of about 270K to 315K. More >