Samer Alabed^*, Mohammad Al-Rabayah, Wael Hosny Fouad Aly

CMC-Computers, Materials & Continua, Vol.73, No.3, pp. 5641-5653, 2022, DOI:10.32604/cmc.2022.030371 - 28 July 2022

Abstract Rotman lens, which is a radio frequency beam-former that consists of multiple input and multiple output beam ports, can be used in industrial, scientific, and medical applications as a beam steering device. The input ports collect the signals to be propagated through the lens cavity toward the output ports before being transmitted by the antenna arrays to the destination in order to enhance the error performance by optimizing the overall signal to noise ratio (SNR). In this article, a low-cost Rotman lens antenna is designed and deployed to enhance the overall performance of the conventional… More >

Samer Alabed¹, Ibrahim Mahariq^1,*, Mohammad Salman¹, Mustafa Kuzuoglu²

CMC-Computers, Materials & Continua, Vol.69, No.1, pp. 575-588, 2021, DOI:10.32604/cmc.2021.018245 - 04 June 2021

Abstract In this article, a low-cost electromagnetic structure emulating photonic nanojets is utilized to improve the efficiency of wireless relay networks. The spectral element method, due to its high accuracy, is used to verify the efficiency of the proposed structure by solving the associate field distribution. The application of optimal single-relay selection method shows that full diversity gain with low complexity can be achieved. In this paper, the proposed technique using smart relays combines the aforementioned two methods to attain the benefits of both methods by achieving the highest coding and diversity gain and enhances the More >

Samer Alabed^*, Issam Maaz, Mohammad Al-Rabayah

CMC-Computers, Materials & Continua, Vol.69, No.1, pp. 539-553, 2021, DOI:10.32604/cmc.2021.018061 - 04 June 2021

Abstract In this article, we introduce a new bi-directional dual-relay selection strategy with its bit error rate (BER) performance analysis. During the first step of the proposed strategy, two relays out of a set of N relay-nodes are selected in a way to optimize the system performance in terms of BER, based on the suggested algorithm which checks if the selected relays using the max-min criterion are the best ones. In the second step, the chosen relay-nodes perform an orthogonal space-time coding scheme using the two-phase relaying protocol to establish a bi-directional communication between the communicating More >