Giada Faraco, Andrea Vincenzo De Nunzio, Nicola Ivan Giannoccaro^*, Arcangelo Messina

Structural Durability & Health Monitoring, Vol.18, No.6, pp. 739-762, 2024, DOI:10.32604/sdhm.2024.052663 - 20 September 2024

Abstract The possibility of determining the integrity of a real structure subjected to non-invasive and non-destructive monitoring, such as that carried out by a series of accelerometers placed on the structure, is certainly a goal of extreme and current interest. In the present work, the results obtained from the processing of experimental data of a real structure are shown. The analyzed structure is a lattice structure approximately 9 m high, monitored with 18 uniaxial accelerometers positioned in pairs on 9 different levels. The data used refer to continuous monitoring that lasted for a total of 1… More >

R. Ganesan^1,*, G. Sankaranarayanan¹, M. Pradeep Kumar², V. K. Bupesh Raja¹

Intelligent Automation & Soft Computing, Vol.36, No.1, pp. 667-681, 2023, DOI:10.32604/iasc.2023.031932 - 29 September 2022

Abstract This research introduces a challenge in integrating and cleaning the data, which is a crucial task in object matching. While the object is detected and then measured, the vibration at different light intensities may influence the durability and reliability of mechanical systems or structures and cause problems such as damage, abnormal stopping, and disaster. Recent research failed to improve the accuracy rate and the computation time in tracking an object and in the vibration measurement. To solve all these problems, this proposed research simplifies the scaling factor determination by assigning a known real-world dimension to… More >

Yisu Xi¹, Binkai Shi², Wei Xu^1,3,*, Jing Ge⁴, Huaxin Zhu⁵, Dragoslav Sumarac^6,7

Structural Durability & Health Monitoring, Vol.16, No.2, pp. 163-177, 2022, DOI:10.32604/sdhm.2022.022082 - 25 April 2022

Abstract With the aid of non-contact measurements of vibrating surfaces through laser scanning, operating deflection shapes (ODSs) with high spatial resolutions can be used to graphically characterize damage in plane structures. Although numerous damage identification approaches relying on laser-measured ODSs have been developed for plate-type structures, they cannot be directly applied to circular cylinders due to the gap between equations of motions of plates and circular cylinders. To fill this gap, a novel approach is proposed in this study for damage identification of circular cylinders. Damage-induced discontinuities of the derivatives of ODSs can be used to More >

Motoharu Fujigaki^*, Tomoaki Nakajima

The International Conference on Computational & Experimental Engineering and Sciences, Vol.21, No.1, pp. 2-2, 2019, DOI:10.32604/icces.2019.05156

Abstract A sampling moire camera was developed by authors to measure the displacement of large structures effectively. The sampling moire camera was applied to small vibration measurement of a plant equipment in this paper. An algorithm of a sampling moire method is assembled into the sampling moire camera. It is very convenient to use the sampling moire camera in a practical field outdoors because any calibration is not necessary. This camera can measure the 2-D displacement in real-time. An experiment to measure small vibration of a moving conveyor belt to carry materials in a steel plant More >