Jinyu Gu¹, Jinping Qu¹, Yingjun Wang^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.4, pp. 1-1, 2023, DOI:10.32604/icces.2023.09161

Abstract In the topology optimization problem of mechanical structures, the optimization objectives are mainly focused on the compliance minimization, displacement minimization, stress minimization, and so on. However, in practical engineering, these kinds of optimization objectives do not meet all the requirements. Some structures, such as wind turbine blades and engine blades of aircrafts, are required to maintain a superior aerodynamic shape under external loads. This puts a higher requirement on the local deformation homogenization of the structure. Therefore, we proposed a topology optimization method for the minimization of local relative displacement differences considering stress constraints. First,… More >

Wenjun Chen¹, Yingjun Wang^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.2, pp. 1-1, 2023, DOI:10.32604/icces.2023.09095

Abstract The rapid development of topology optimization has given birth to a large amount of different topology optimization methods, and each of them can manage a class of corresponding engineering problems. However, structures need to meet a variety of requirements in engineering application, such as lightweight and multiple load-bearing performance. To design composite structures that have multiple structural properties, a new multi-scale topology optimization method considering multiple structural performances is proposed in this paper. Based on the fitting functions of the result set and the bisection method, a new method to determine the weight coefficient is… More >

Yuhao Yang¹, Yingjun Wang^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.2, pp. 1-1, 2023, DOI:10.32604/icces.2023.09068

Abstract In the intelligent structural optimization, designers can obtain a high-performance design scheme automatically with the help of topology optimization (TO). Since computer aided design (CAD) and computer aided engineering (CAE) models have different geometric representations in TO, the optimized results must be reconstructed to generate CAD models, which is complicated and time-consuming. To address this issue, the isogeometric analysis (IGA) is employed in TO to replace the finite element method (FEM), and such TO is termed as isogeometric TO (ITO). ITO is an advanced TO method with high efficiency and accuracy. It uses the same… More >