Hao Chen^1,2, Xianbin Teng^2,*, Faxin Zhu^1,*, Zhibin Zhang², Jie Wang¹

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.8, pp. 1799-1821, 2024, DOI:10.32604/fdmp.2024.049731 - 06 August 2024

Abstract Scouring experiments were conducted using a three-dimensional laser scanning technology for angles of the jet spanning the interval from 0° to 30°, and the characteristics of the scour hole in equilibrium conditions were investigated accordingly. The results indicate that the optimal scouring effects occur when the jet angle is in the ranges between 15° and 20°. Moreover, the dimensionless profiles of the scour hole exhibit a high degree of similarity at different jet angles. Numerical simulations conducted using the Flow-3D software to investigate the bed shear stress along the jet impingement surface have shown that More >

Hao Chen^1,2, Xianbin Teng^2,*, Zhibin Zhang², Faxin Zhu¹, Jie Wang¹, Zhaohao Zhang²

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.2, pp. 429-445, 2024, DOI:10.32604/fdmp.2023.030585 - 14 December 2023

Abstract Water jet technology is widely used in submerged buried pipes as a non-traditional trenching process, often involving a complex sediment response. An important adjustable and influential engineering variable in this technology is represented by the impinging distance. In this study, the FLOW-3D software was used to simulate the jet scouring of sand beds in a submerged environment. In particular, four sets of experimental conditions were considered to discern the relationship between the maximum scour depth and mass and the impinging distance. As shown by the results, a critical impinging distance exists by which the static More > Graphic Abstract