Ayman Amer¹, Firas M. Makahleh², Jafar Ababneh³, Hani Attar⁴, Ahmed Amin Ahmed Solyman⁵, Mehrdad Ahmadi Kamarposhti^6,*, Phatiphat Thounthong⁷

Intelligent Automation & Soft Computing, Vol.36, No.3, pp. 3425-3446, 2023, DOI:10.32604/iasc.2023.034854 - 15 March 2023

Abstract With the daily expansion of global energy consumption, developing the power grids is of uttermost importance. However, building a new transmission line is costly and time-consuming, so utilizing the same lines with possible higher transmission capacity is very cost-effective. In this regard, to increase the capacity of the transmission lines, the flexible alternating current transmission system (FACTS) has been widely used in power grids in recent years by industrialized countries. One of the essential topics in electrical power systems is the reactive power compensation, and the FACTS plays a significant role in controlling the reactive More >

V. Nandagopal^1,*, T. S. Balaji Damodhar², P. Vijayapriya³, A. Thamilmaran³

Intelligent Automation & Soft Computing, Vol.36, No.2, pp. 1315-1329, 2023, DOI:10.32604/iasc.2023.032039 - 05 January 2023

Abstract

The development of non-linear loads at consumers has significantly impacted power supply systems. Since, the poor power quality has been found in the three-phase distribution system due to unbalanced loads, harmonic current, undesired voltage regulation, and extreme reactive power demand. To overcome this issue, Distributed STATicCOMpensator (DSTATCOM) is implemented. DSTATCOM is a shunt-connected Voltage Source Converter (VSC) that has been utilized in distribution networks to balance the bus voltage in terms of enhancing reactive power control and power factor. DSTATCOM can provide both rapid and continuous capacitive and inductive mode compensation. A rectified resistive and

… More >

Mehrdad Ahmadi Kamarposhti^1,*, Ilhami Colak², Phatiphat Thounthong³, Kei Eguchi⁴

CMC-Computers, Materials & Continua, Vol.74, No.2, pp. 4547-4570, 2023, DOI:10.32604/cmc.2023.034082 - 31 October 2022

Abstract The present study suggests that series voltage injection is more effective than parallel current injection to improve voltage quality on the load side. The line voltage can be accurately symmetrized at the connection point by creating and controlling a series voltage component in each phase. This is more reliable and effective than parallel current injection. A dynamic voltage restorer (DVR) and a distribution static synchronous compensator (DSTATCOM) were utilized to provide the required power. The DVR is an effective and modern device utilized in parallel within the grid and can protect sensitive loads from voltage More >

C. Gnana Thilaka^*, M. Mary Linda

Intelligent Automation & Soft Computing, Vol.35, No.3, pp. 3429-3445, 2023, DOI:10.32604/iasc.2023.024028 - 17 August 2022

Abstract The application of non-linear loads in the power electronic device causes serious harmonic issues in the power system since it has the intrinsic property of retrieving harmonic current and reactive power from Alternating Current (AC) supply that leads to voltage instability. To maintain a reliable power flow in the power system, an innovative Unified Power Flow Converter (UPFC) is utilized in this proposed approach. The conventional series converter is replaced with the Modular Multilevel Converter (MMC) that improves the power handling capability and achieves higher modular level with minimized distortions. The shunt compensator assists in… More >

R. Hemalatha^1,*, M. Ramasamy²

Intelligent Automation & Soft Computing, Vol.35, No.2, pp. 1505-1525, 2023, DOI:10.32604/iasc.2023.026301 - 19 July 2022

Abstract In recent day’s power distribution system is distress from acute power quality issues. In this work, for compensating Power Quality (PQ) disturbances a seven level cascaded H-bridge inverter is implemented in distribution static compensator which protects power quality problems in currents. Distribution Static Compensator (DSTATCOM) aid to enhances power factor and removes total harmonic distortion which is drawn from non-linear load. The D–Q reference theory based hysteresis current controller is employed to generate reference current for compensation of harmonics and reactive power, additionally Probabilistic Neural Network (PNN) classifier is used which easily separates exact harmonics. More >

R. S. Jothilakshmi^*, S. Chitra Selvi

Intelligent Automation & Soft Computing, Vol.34, No.2, pp. 865-876, 2022, DOI:10.32604/iasc.2022.025643 - 03 May 2022

Abstract The hybrid renewable energy harvesting and grid integration system has been proposed and validated in this work. The proposed system uses a Wind Energy Conversion System (WECS) and a Solar Photo Voltaic Energy Conversion System (SPVECS). The WECS uses Permanent Magnet Synchronous Generator (PMSG) driven by a wind turbine. The variable frequency and variable voltage output of PMSG is rectified by Diode Bridge Rectifier (DBR) and stepped up by Super Lift Luo Converter (SLLC 1), and finally, the harvested wind energy is delivered to the Direct Current (DC) link of a Distributed Static Synchronous Compensator More >

Shuqiao Dan^*

Energy Engineering, Vol.119, No.3, pp. 1047-1057, 2022, DOI:10.32604/ee.2022.015594 - 31 March 2022

Abstract There are several problems existing in the direct starting of asynchronous motor such as large starting current, reactive power absorption from network side and weak interference-resistance, etc. Aiming at this, a comprehensive energy-saving optimization model of asynchronous motor for voltage regulation based on static synchronous compensator (STATCOM) is put forward. By analyzing the working principle and operation performance of static synchronous compensator regulating voltage, a new energy-efficient optimization method for asynchronous motor is proposed based on the voltage regulator model to achieve soft start, continuous dynamic reactive power compensation and the terminal voltage stability control. More >