Xi Wang¹, Shan Qing^1,*, Zhumei Luo^1,*, Yiqin Liu^1,2, Zichang Shi¹, Jiachen Li¹

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.9, pp. 2399-2416, 2023, DOI:10.32604/fdmp.2023.028024 - 16 May 2023

Abstract Propylene glycol-based MWCNT (multi-walled carbon nanotubes) nanofluids were prepared in the framework of a two-step method and by using a suitable PVP (polyvinyl pyrrolidone) dispersant. The BBD (Box-Behnken design) model was exploited to analyze 17 sets of experiments and examine the sensitivity of the absorbance to three parameters, namely the concentration of MWCNT, the SN ratio (mass ratio of carbon nanotubes to surfactants) and the sonication time. The results have revealed that, while the SN ratio and concentration of MWCNT have a strong effect on the absorbance, the influence of the sonication time is less… More >

Xiaoyong Gu^*, Guohe Jiang, Yang Wo, Biwen Chen

Frontiers in Heat and Mass Transfer, Vol.15, pp. 1-8, 2020, DOI:10.5098/hmt.15.3

Abstract The heat transfer characteristics of propylene glycol-water (PG-W) mixture with different concentrations in shell side of spiral wound heat exchanger (SWHE) with different geometric parameters were studied numerically. Experiment was carried out and the average difference between the simulated results and the experimental results was 5.3%. The simulation results show that heat transfer coefficient increases with the increase of center core diameter and longitudinal spacing of tubes, but decreases with the increase of tube outer diameter. The center core diameter and tube outer diameter have greater effects on heat transfer performances at higher concentration. Economic More >