Feng Zhao, Guangdi Liu^*, Xiaoqiang Chen, Ying Wang

Energy Engineering, Vol.121, No.7, pp. 1865-1882, 2024, DOI:10.32604/ee.2024.048209 - 11 June 2024

Abstract In light of the prevailing issue that the existing convolutional neural network (CNN) power quality disturbance identification method can only extract single-scale features, which leads to a lack of feature information and weak anti-noise performance, a new approach for identifying power quality disturbances based on an adaptive Kalman filter (KF) and multi-scale channel attention (MS-CAM) fused convolutional neural network is suggested. Single and composite-disruption signals are generated through simulation. The adaptive maximum likelihood Kalman filter is employed for noise reduction in the initial disturbance signal, and subsequent integration of multi-scale features into the conventional CNN… More >

Yanjun Yan, Kai Chen^*, Hang Geng, Wenqian Fan, Xinrui Zhou

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.2, pp. 1345-1379, 2023, DOI:10.32604/cmes.2023.027252 - 26 June 2023

Abstract With increasing global concerns about clean energy in smart grids, the detection of power quality disturbances (PQDs) caused by energy instability is becoming more and more prominent. It is well acknowledged that the PQD effects on power grid equipment are destructive and hazardous, which causes irreversible damage to underlying electrical/electronic equipment of the concerned intelligent grids. In order to ensure safe and reliable equipment implementation, appropriate PQD detection technologies must be adopted to avoid such adverse effects. This paper summarizes the newly proposed and traditional PQD detection techniques in order to give a quick start More > Graphic Abstract

Abdul Quawi^1,*, Y. Mohamed Shuaib¹, M. Manikandan²

Intelligent Automation & Soft Computing, Vol.36, No.3, pp. 3469-3486, 2023, DOI:10.32604/iasc.2023.035001 - 15 March 2023

Abstract In this work, an Artificial Neural Network (ANN) based technique is suggested for classifying the faults which occur in hybrid power distribution systems. Power, which is generated by the solar and wind energy-based hybrid system, is given to the grid at the Point of Common Coupling (PCC). A boost converter along with perturb and observe (P&O) algorithm is utilized in this system to obtain a constant link voltage. In contrast, the link voltage of the wind energy conversion system (WECS) is retained with the assistance of a Proportional Integral (PI) controller. The grid synchronization is… More >

Feng Zhao^1,2, Di Liao^1,*, Xiaoqiang Chen^1,2, Ying Wang^1,2

Energy Engineering, Vol.120, No.5, pp. 1133-1148, 2023, DOI:10.32604/ee.2023.025900 - 20 February 2023

Abstract Aiming at the problems of multiple types of power quality composite disturbances, strong feature correlation and high recognition error rate, a method of power quality composite disturbances identification based on multi-resolution S-transform and decision tree was proposed. Firstly, according to IEEE standard, the signal models of seven single power quality disturbances and 17 combined power quality disturbances are given, and the disturbance waveform samples are generated in batches. Then, in order to improve the recognition accuracy, the adjustment factor is introduced to obtain the controllable time-frequency resolution through multi-resolution S-transform time-frequency domain analysis. On this… More >

Nagendra Kumar Swarnkar¹, Om Prakash Mahela², Baseem Khan^3,*, Mahendra Lalwani¹

Energy Engineering, Vol.119, No.2, pp. 473-497, 2022, DOI:10.32604/ee.2022.017703 - 24 January 2022

Abstract A multiple power quality (MPQ) disturbance has two or more power quality (PQ) disturbances superimposed on a voltage signal. A compact and robust technique is required to identify and classify the MPQ disturbances. This manuscript investigated a hybrid algorithm which is designed using parallel processing of voltage with multiple power quality (MPQ) disturbance using stockwell transform (ST) and hilbert transform (HT). This will reduce the computational time to identify the MPQ disturbances, which makes the algorithm fast. A MPQ identification index (IPI) is computed using statistical features extracted from the voltage signal using the ST… More >