Wenbin Luo^1,*, Lingfeng Tang¹, Yuting Yan², Yifang Shi¹

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.4, pp. 869-899, 2023, DOI:10.32604/fdmp.2022.022280 - 02 November 2022

Abstract The aim of the study is to determine the optimal structural parameters for a plastic centrifugal pump inducer within the framework of an orthogonal experimental method. For this purpose, a numerical study of the related flow field is performed using CFX. The shaft power and the head of the pump are taken as the evaluation indicators. Accordingly, the examined variables are the thickness (S), the blade cascade degree (t), the blade rim angle (β1), the blade hub angle (β2) and the hub length (L). The impact of each structural parameter on each evaluation index is More >

Wenbin Luo^1,*, Youmin Wang¹, Yuting Yan², Yifang Shi¹, Zhendong Zhang³

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.3, pp. 789-813, 2022, DOI:10.32604/fdmp.2022.019691 - 22 February 2022

Abstract In order to determine the optimal structural parameters of a plastic centrifugal pump in the framework of an orthogonal-experiment approach, a numerical study of the related flow field has been performed using CFX. The thickness S, outlet angle β2, inlet angle β1, wrap angle, and inlet diameter D1 of the splitter blades have been considered as the variable factors, using the shaft power and efficiency of the pump as evaluation indices. Through a parametric analysis, the relative importance of the influence of each structural parameter on each evaluation index has been obtained, leading to the More >

Yifang Shi^*, Lingfeng Tang, Yinwu Tan, Wenbin Luo

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.3, pp. 713-736, 2022, DOI:10.32604/fdmp.2022.018434 - 22 February 2022

Abstract The structural design parameters of a plastic centrifugal pump were calculated and modeled, and flow field simulation analysis of the model was performed using CFD, in the framework of an orthogonal design method (or experiment). The inlet mounting angle β1, outlet mounting angle β2, wrap angle ϕ, and impeller inlet diameter D1 of the pump impeller were the four factors assumed for the application of the orthogonal experiment, using the efficiency and Net Positive Suction Head (NPSH) as evaluation indices. Moreover, taking the maximum efficiency and minimum NPSH of the plastic centrifugal pump as the More >