Abderrahim Boutasknit^1,2,3, Mohamed Anli³, Rachid Lahlali^4,*, Abdelilah Meddich^2,3,5,*

Phyton-International Journal of Experimental Botany, Vol.93, No.9, pp. 2227-2249, 2024, DOI:10.32604/phyton.2024.055629 - 30 September 2024

Abstract Applying organic waste and inorganic additives during composting can be an effective and easy-to-control strategy for optimizing humification, maturation, and the availability of essential mineral elements in compost. In this respect, this study aims to evaluate the effect of organic (olive-mill waste and horse manure) and inorganic (phosphogypsum) additives on the evolution of maturity indices, aromatic compounds, and nutrient availability during composting. Four mixtures [horse manure + green waste (M1), olive-mill + green waste (M2), sewage-sludge + phos-phogypsum + green waste (M3), and green waste (M4)] were carried out. Physicochemical (temperature, pH, phosphorus, nitrogen, and… More >

Yu Wang^1,2, Mengyang Ma^1,2,*, Yong Long^1,2, Qingxiang Zhao^1,2, Zhifei Cheng^1,2

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.8, pp. 1773-1784, 2024, DOI:10.32604/fdmp.2024.048695 - 06 August 2024

Abstract Shrinkage-induced cracking is a common issue in concrete structures, where the formation of cracks not only affects the aesthetic appearance of concrete but also potentially reduces its durability and strength. In this study, the effect of ceramsite sand addition on the properties of a ternary system of cement-ground granulated blast furnace slag (GGBFS)-phosphogypsum (PG) is investigated. In particular, the fluidity, rheology, hydration heat, compressive strength, autogenous shrinkage, and drying shrinkage of the considered mortar specimens are analyzed. The results indicate that an increase in PG content leads to a decrease in fluidity, higher viscosity, lower More >

Hongfei Yue¹, Aiguo Fang², Sudong Hua^1,*, Zenghuan Gu³, Yu Jia¹, Cheng Yang⁴

Journal of Renewable Materials, Vol.10, No.8, pp. 2247-2261, 2022, DOI:10.32604/jrm.2022.018901 - 25 April 2022

Abstract A phosphogypsum-based subgrade stabilizer (PBSS) was formulated using industrial by-product phosphogypsum (PG), mixed with slag and calcium-silicon-rich active material (GSR). The active powder (AP) was used to modify PBSS, and PBSS-AP was obtained. PBSS and PBSS-AP were each mixed with 10% silty soil, and cement and lime (CAL: 5% lime + 2% cement) were used as the traditional material for comparative experiments. Samples were cured under standard conditions, and tested for unconfined compressive strength (UCS), water stability, volume expansion, and leachate, to explore the stabilization effect of the three solidified materials on silty soil. The More >

Zaibo Zhou¹, Juanhong Liu^1,2,3,*, Kun Luo¹, Aixiang Wu^1,3, Hongjiang Wang^1,3

Journal of Renewable Materials, Vol.10, No.2, pp. 373-384, 2022, DOI:10.32604/jrm.2022.016380 - 30 August 2021

Abstract In order to reduce the influence of impurities in hemihydrate phosphogypsum(HPG) on the environment and improve the workability of HPG, the effects of the content of quicklime and types of biopolymer (hydroxypropyl methylcellulose, xanthan gum, sodium polyacrylate(PAANa)) on the compressive strength, softening coefficient and ultrasonic velocity of HPG were evaluated. When the content of quicklime was 1.5% and the content of PAANa was 0.2%, HPG had the best mechanical properties and workability, its water retention rate can be increased by 5.8%, and unconfined compressive strength of 3 days increased by 10.3% and 7 days increased More > Graphic Abstract

Zenghuan Gu¹, Aiguo Fang², Sudong Hua^1,*, Qingzhou Zhao², Lidong Sun², Fan Xia², Liying Qian³, Xiaojian Ren³

Journal of Renewable Materials, Vol.9, No.2, pp. 253-268, 2021, DOI:10.32604/jrm.2021.011912 - 15 December 2020

Abstract The research used industrial by-products original phosphogypsum (PG) as the main raw material, slag (SG) and Portland cement (PC) as auxiliary materials, and the optimal additive amount was determined according to the compressive strength value of the sample. Comprehensively evaluate the water resistance and volume stability of the samples, and determine the best formula for new roadbed stabilized materials. The results showed that when the weight ratio of PG, slag and cement was OPG:SG:PC = 6:3:1, and mixed with 5% micro silica fume (MSF) and 3‰ hydroxypropyl methyl cellulose (HPMC), the sample’s comprehensive performance was… More >

Yanrong Zhao^1,2,3,#, Ping Chen^1,4,*,#, Shifeng Wang⁵, Yaxiong Ji^3,4, Yuanhao Wang^3,4,*, Bolin Wu^1,2, Rongjin Liu¹

Journal of Renewable Materials, Vol.8, No.11, pp. 1531-1541, 2020, DOI:10.32604/jrm.2020.011462 - 28 September 2020

Abstract Bayer red mud (BRM) is a kind of industrial solid waste characterized by huge volume and high alkalinity. Its disposal generates serious environmental pollution and occupies a large number of farmland. The utilization and recycling of BRM is currently a crucial issue and needs to be addressed as soon as possible. The chemical composition of BRM is similar to cement clinker. In this study, the feasibility of preparing Belite-ferroaluminate clinker (BFAC) with different BRM was explored. The physical properties, mechanics performance, radioactivity levels and trace harmful metals leaching were measured. XRD, BEI and EDS were… More >