Yaren Aydın¹, Gebrail Bekdaş^1,*, Sinan Melih Nigdeli¹, Zong Woo Geem^2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.141, No.3, pp. 2471-2499, 2024, DOI:10.32604/cmes.2024.056693 - 31 October 2024

Abstract Dynamic impacts such as wind and earthquakes cause loss of life and economic damage. To ensure safety against these effects, various measures have been taken from past to present and solutions have been developed using different technologies. Tall buildings are more susceptible to vibrations such as wind and earthquakes. Therefore, vibration control has become an important issue in civil engineering. This study optimizes tuned mass damper inerter (TMDI) using far-fault ground motion records. This study derives the optimum parameters of TMDI using the Adaptive Harmony Search algorithm. Structure displacement and total acceleration against earthquake load More >

Ambareen Khan¹, Sher Afghan Khan², Mohammed Nishat Akhtar^1,*, Abdul Aabid^3,*, Muneer Baig³

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.9, pp. 2007-2028, 2024, DOI:10.32604/fdmp.2024.049368 - 23 August 2024

Abstract When better fuel-air mixing in the combustion chamber or a reduction in base drag are required in vehicles, rockets, and aeroplanes, the base pressure control is activated. Controlling the base pressure and drag is necessary in both scenarios. In this work, semi-circular ribs with varying diameters (2, 4, and 6 mm) positioned at six distinct positions (0.5D, 1D, 1.5D, 2D, 3D, and 4D) inside a square duct with a side of 15 mm are proposed as an efficient way to apply the passive control technique. In-depth research is done on optimising rib size for various More > Graphic Abstract

Nur Husnina Muhamad Zuraidi¹, Sher Afghan Khan^1,*, Abdul Aabid^2,*, Muneer Baig², Istiyaq Mudassir Shaiq³

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.3, pp. 807-829, 2023, DOI:10.32604/fdmp.2023.023246 - 29 September 2022

Abstract In this study, a duct is considered and special attention is paid to a passive method for the control of the base pressure relying on the use of a cavity with a variable aspect ratio. The Mach number considered is 1.8, and the area ratio of the duct is 2.56. In particular, two cavities are examined, their sizes being 3:3 and 6:3. The used L/D spans the interval 1–10 while the NPRs (nozzle pressure ratio) range from 2 to 9. The results show that the control becomes effective once the nozzles are correctly expanded or More >

Haojie Lian^1,2, Leilei Chen^2,3, Xiao Lin⁴, Wenchang Zhao^5,*, Stephane P. A. Bordas^6,7, Mingdong Zhou^8,*

CMES-Computer Modeling in Engineering & Sciences, Vol.131, No.1, pp. 1-18, 2022, DOI:10.32604/cmes.2022.019705 - 24 January 2022

Abstract This paper proposes a novel optimization framework in passive control techniques to reduce noise pollution. The geometries of the structures are represented by Catmull-Clark subdivision surfaces, which are able to build gap-free Computer-Aided Design models and meanwhile tackle the extraordinary points that are commonly encountered in geometric modelling. The acoustic fields are simulated using the isogeometric boundary element method, and a density-based topology optimization is conducted to optimize distribution of sound-absorbing materials adhered to structural surfaces. The approach enables one to perform acoustic optimization from Computer-Aided Design models directly without needing meshing and volume parameterization, More >