Roland Martin¹, Carlos Couder-Castaneda¹

CMES-Computer Modeling in Engineering & Sciences, Vol.63, No.1, pp. 47-78, 2010, DOI:10.3970/cmes.2010.063.047

Abstract We develop an unsplit convolutional perfectly matched layer (CPML) technique to absorb efficiently compressible viscous flows and their related supersonic or subsonic regimes at the outer boundary of a distorted computational domain. More particularly subsonic outgoing flows or subsonic wall-boundary layers close to the PML are well absorbed, which is difficult to obtain without creating numerical instabilities over long time periods. This new PML (CPML) introduces the calculation of auxiliary memory variables at each time step and allows an unsplit formulation of the PML. Damping functions involving a high shift in the frequency domain allow a much better absorption of… More >

F.P. Mariano¹, L.Q. Moreira¹, A. Silveira-Neto¹, C.B. da Silva², J.C.F. Pereira²

CMES-Computer Modeling in Engineering & Sciences, Vol.59, No.2, pp. 181-216, 2010, DOI:10.3970/cmes.2010.059.181

Abstract A new numerical methodology combining Fourier pseudo-spectral and immersed boundary methods - IMERSPEC - is developed for fluid flow problems governed by the incompressible Navier-Stokes equations. The numerical algorithm consists in a classical Fourier pseudo-spectral methodology using the collocation method where wall boundary conditions are modelled by using an immersed boundary method (IBM). The performance of that new methodology is exemplified in two-dimensional numerical simulations of Green-Taylor decaying vortex, lid-driven cavity and flow over a square cylinder. The convergence rate, the accuracy, the influence of the Reynolds number and the external domain size are analyzed. This new method combines some… More >

G.C. Bourantas¹, E.D. Skouras^2,3, V.C. Loukopoulos⁴, G.C. Nikiforidis¹

CMES-Computer Modeling in Engineering & Sciences, Vol.59, No.1, pp. 31-64, 2010, DOI:10.3970/cmes.2010.059.031

Abstract A meshfree point collocation method has been developed for the velocity-vorticity formulation of two-dimensional, steady state incompressible Navier-Stokes equations. Particular emphasis was placed on the application of the velocity-correc -tion method, ensuring the continuity equation. The Moving Least Squares (MLS) approximation is employed for the construction of the shape functions, in conjunction with the general framework of the point collocation method. Computations are obtained for regular and irregular nodal distributions, stressing the positivity conditions that make the matrix of the system stable and convergent. The accuracy and the stability of the proposed scheme are demonstrated through two representative, well-known, and… More >

S. Aland¹, J. Lowengrub², A. Voigt¹

CMES-Computer Modeling in Engineering & Sciences, Vol.57, No.1, pp. 77-108, 2010, DOI:10.3970/cmes.2010.057.077

Abstract We present a new method for simulating two-phase flows in complex geometries, taking into account contact lines separating immiscible incompressible components. We combine the diffuse domain method for solving PDEs in complex geometries with the diffuse-interface (phase-field) method for simulating multiphase flows. In this approach, the complex geometry is described implicitly by introducing a new phase-field variable, which is a smooth approximation of the characteristic function of the complex domain. The fluid and component concentration equations are reformulated and solved in larger regular domain with the boundary conditions being implicitly modeled using source terms. The method is straightforward to implement… More >

V.C. Mariani¹, E.E.M. Alonso², S. Peters³

CMES-Computer Modeling in Engineering & Sciences, Vol.29, No.1, pp. 15-28, 2008, DOI:10.3970/cmes.2008.029.015

Abstract An application of Newton's method for linearization of advective terms given by the discretization on unstructured Voronoi meshes for the incompressible Navier-Stokes equations is proposed and evaluated in this article. One of the major advantages of the unstructured approach is its application to very complex geometrical domains and the mesh is adaptable to features of the flow. Moreover, in this work comparisons with the literature results in bi-dimensional lid-driven cavities for different Reynolds numbers allow us to assess the numerical properties of the new proposed finite-volume scheme. Results for the components of the velocity, and the pressure collocated at the… More >

E.J. Sellountos¹, A. Sequeira¹

CMES-Computer Modeling in Engineering & Sciences, Vol.23, No.2, pp. 127-148, 2008, DOI:10.3970/cmes.2008.023.127

Abstract In this work a hybrid velocity-vorticity scheme for the solution of the 2D Navier-Stokes equations is presented. The multi-region Local Boundary Integral Equation (LBIE) combined with Radial Basis Functions (RBF) interpolation is used for the solution of the kinematics and the multi-region BEM for the solution of the transport kinetics. The final system of equations is in band form for both methods. The issue of RBF discontinuities is resolved by constructing the RBF matrix locally in every region. The kinematics integral equation is used in three different forms, for coupling the velocity field on the boundary, on interior points and… More >

Alfredo Nicolás¹, Blanca Bermúdez²

CMES-Computer Modeling in Engineering & Sciences, Vol.20, No.2, pp. 73-84, 2007, DOI:10.3970/cmes.2007.020.073

Abstract 2D viscous incompressible flows are presented from the unsteady Navier-Stokes equations in its velocity-vorticity formulation. The results are obtained using a simple numerical procedure based on a fixed point iterative process to solve the nonlinear elliptic system that results once a second order time discretization is performed. Flows on the un-regularized unit driven cavity problem are reported up to Reynolds numbers Re=4000 to compare them with those reported by other authors, mainly solving the steady problem, and supposed to be correct. Moreover, results are reported for Re = 1000, 4000, 5000, and 10000 to see how their flows look like… More >

J. M. F. Trindade¹, J. C. F. Pereira²

CMES-Computer Modeling in Engineering & Sciences, Vol.20, No.1, pp. 1-10, 2007, DOI:10.3970/cmes.2007.020.001

Abstract In this paper, we discuss the efficiency and speed-up of parallel-in-time calculations of the unsteady incompressible Navier-Stokes equations in a PC-cluster. The parallel-in-time method is based on the alternate use of coarse global sequential solvers with fine local parallel ones in an iterative predictor-corrector fashion. Therefore, the efficiency of parallel calculations is strongly dependent on the number of iterations required for convergence. The one-dimensional scalar transport equation and the two-dimensional incompressible unsteady form of the Navier-Stokes equations were used to conduct numerical experiments to derive some conclusions concerning the accuracy and convergence of the iterative method. A simple performance model… More >

F. Bierbrauer, S.-P. Zhu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.19, No.1, pp. 1-22, 2007, DOI:10.3970/cmes.2007.019.001

Abstract Recently the use of the one-field formulation in the numerical solution of the Navier-Stokes equations for two-phase incompressible flow has become a very attractive approach in CFD (computational fluid dynamics). While the presence of material discontinuities across fluid interfaces presents some difficulty, it is their combination with a non-solenoidal discontinuous initial velocity field, commonly occurring in the mathematical formulation, that has provided the greatest hindrance in the numerical solution. This paper presents three analytical solutions, the Bounded Creeping Flow, Solenoidal and Conserved Solenoidal Solutions, which are both continuous, incompressible, retain as much of the original mathematical formulation as possible and… More >

H. Lin, S.N. Atluri¹

CMES-Computer Modeling in Engineering & Sciences, Vol.2, No.2, pp. 117-142, 2001, DOI:10.3970/cmes.2001.002.117

Abstract The truly Meshless Local Petrov-Galerkin (MLPG) method is extended to solve the incompressible Navier-Stokes equations. The local weak form is modified in a very careful way so as to ovecome the so-called Babus^~ka-Brezzi conditions. In addition, The upwinding scheme as developed in Lin and Atluri (2000a) and Lin and Atluri (2000b) is used to stabilize the convection operator in the streamline direction. Numerical results for benchmark problems show that the MLPG method is very promising to solve the convection dominated fluid mechanics problems. More >