Kee-Ahn Lee^1,*, So-Yeon Park¹, Soo-Bin Kim¹, Young-Kyun Kim^1,2

The International Conference on Computational & Experimental Engineering and Sciences, Vol.31, No.4, pp. 1-1, 2024, DOI:10.32604/icces.2024.012196

Abstract NiCoCr medium-entropy alloys (MEAs) with controlled interstitial C contents were fabricated by using powder bed fusion-type additive manufacturing (AM) process. And the microstructure, mechanical properties, and high temperature oxidation resistance of in-situ carbide-reinforced NiCoCr Medium alloy were investigated. The initial microstructure shows that both AM-built interstitial C-doped MEAs had a heterogeneous grain structure and epitaxial growth grains along the building direction. The analysis of electron channeling contrast images showed a large amount of nano-sized precipitates (in-situ precipitates) distributed at the sub-structure boundaries formed by a dislocation network, and a large number of stacking faults were simultaneously observed inside the sub-structure. A… More >

Chenze Li¹, Manish Jain^1,2, Qian Liu¹, Zhuohan Cao¹, Michael Ferry³, Jamie J. Kruzic¹, Bernd Gludovatz¹, Xiaopeng Li^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.31, No.4, pp. 1-2, 2024, DOI:10.32604/icces.2024.011290

Abstract Laser powder bed fusion (LPBF) additive manufacturing (AM) technology has become a versatile tool for producing new microstructures in metal components, offering novel mechanical properties for different applications. In this work, enhanced ductility (~55% elongation) and tunable mechanical anisotropy (ratio of ductility along vertical to horizontal orientation from ~0.2 to ~1) were achieved for a CoCrNi medium entropy alloy (MEA) by multi-scale synergistic microstructure manipulation (i.e., melt pool boundary, grain morphology and crystallographic texture) through adjusting key LPBF processing parameters (e.g., laser power and scan speed). By increasing the volumetric energy density (VED) from 68.3… More >