Hong Dong¹, Xiding Gao^2,*, Xinqi Zhang¹, Qian Wang^1,3, Haipeng Xu¹, Binrui Wang², Chengguo Gao¹, Kaiwen Luo², Hengyi Jiang²

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.9, pp. 1971-1991, 2024, DOI:10.32604/fdmp.2024.049406 - 23 August 2024

Abstract CO₂ pre-injection during hydraulic fracturing is an important method for the development of medium to deep heavy oil reservoirs. It reduces the interfacial tension and viscosity of crude oil, enhances its flowability, maintains reservoir pressure, and increases reservoir drainage capacity. Taking the Badaowan Formation as an example, in this study a detailed three-dimensional geomechanical model based on static data from well logging interpretations is elaborated, which can take into account both vertical and horizontal geological variations and mechanical characteristics. A comprehensive analysis of the impact of key construction parameters on Pre-CO₂ based fracturing (such as cluster More >

Jiayu Ruan¹, Mingjing Lu^2,3, Wei Zhang⁴, Yuxi Zhang¹, Yuhui Zhou^1,*, Jie Gong¹, Fan Wang¹, Yuanxiao Guan¹

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.2, pp. 421-436, 2023, DOI:10.32604/fdmp.2022.020665 - 29 August 2022

Abstract After steam discharge in heavy oil reservoirs, the distribution of temperature, pressure, and permeability in different wells becomes irregular. Flow channels can easily be produced, which affect the sweep efficiency of the oil displacement. Previous studies have shown that the salting-out plugging method can effectively block these channels in high-temperature reservoirs, improve the suction profile, and increase oil production. In the present study, the optimal dosage of the plugging agent is determined taking into account connection transmissibility and inter-well volumes. Together with the connectivity model, a water flooding simulation model is introduced. Moreover, a non-gradient More >