Xingquan Zhang¹, Renjun Xie¹, Kuan Liu^2,*, Yating Li², Yuqiang Xu^2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.6, pp. 1721-1733, 2023, DOI:10.32604/fdmp.2023.025578

Abstract The well-known “lost circulation” problem refers to the uncontrolled flow of whole mud into a formation. In order to address the problem related to the paucity of available data, in the present study, a model is introduced for the lost-circulation risk sample profile of a drilled well. The model is built taking into account effective data (the Block L). Then, using a three-dimensional geological modeling software, relying on the variation function and sequential Gaussian simulation method, a three-dimensional block lost-circulation risk model is introduced able to provide relevant information for regional analyses. More >

Renjun Xie¹, Xingquan Zhang¹, Baolun He^2,*, Ningyu Zheng², Yuqiang Xu^2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.6, pp. 1385-1395, 2023, DOI:10.32604/fdmp.2023.025454

Abstract The optimization of methods for the quantitative evaluation of risks in drilling engineering is an effective means to ensure safety in situations where high temperature and high pressure blocks are considered. In such a context, this study analyzes the complexity of the drilled wells in such blocks. It is shown that phenomena such as well kick, loss, circulation, and sticking, are related to the imbalance of wellbore pressure. A method for risk quantitative evaluation is proposed accordingly. The method is used to evaluate the risk for 9 drilled wells. By comparing the predictions of the method with actual historical data… More > Graphic Abstract

Ming Zeng^1,2, Haibin Cao¹, Ting Pan^1,2,*, Pinduan Hu^1,2, Shi Tian¹, Lijun Zhong³, Zhi Ling⁴

Energy Engineering, Vol.119, No.4, pp. 1569-1586, 2022, DOI:10.32604/ee.2022.019488

Abstract Energy storage system is an important means to improve the flexibility and safety of traditional power system, but it has the problem of high cost and unclear value recovery path. In this paper, the typical application scenarios of energy storage system are summarized and analyzed from the perspectives of user side, power grid side and power generation side. Based on the typical application scenarios, the economic benefit assessment framework of energy storage system including value, time and efficiency indicators is proposed. Typical battery energy storage projects are selected for economic benefit calculation according to different scenarios, and key factors are… More >

Sainan Zhang, Jing Xue^*, Xudong Sun

Energy Engineering, Vol.119, No.4, pp. 1547-1567, 2022, DOI:10.32604/ee.2022.019450

Abstract Since there are multiple influencing factors and lack of evaluation standards for the construction of hydrogen production and hydrogenation station in China, this paper establishes the suitability evaluation index system of hydrogen production and hydrogenation station from four aspects of technology, economy, environment and safety. Combined with actual conditions, this paper uses Analytic Hierarch Process (AHP) and Fuzzy Comprehensive evaluation to evaluate water electrolysis hydrogen and hydrogenation production station and natural gas reformation hydrogen production and hydrogenation station. The results show that hydrogen producing by water electrolysis is more efficient than natural gas reformation in hydrogen production and hydrogenation station,… More > Graphic Abstract

Shuai Zheng, An-Nan Jiang^*, Kai-Shuai Feng

CMES-Computer Modeling in Engineering & Sciences, Vol.129, No.1, pp. 149-166, 2021, DOI:10.32604/cmes.2021.016761

Abstract The randomness of rock joint development is an important factor in the uncertainty of geotechnical engineering stability. In this study, a method is proposed to evaluate the reliability of intermittent jointed rock slope. The least squares support vector machine (LSSVM) evolved by a bacterial foraging optimization algorithm (BFOA) is used to establish a response surface model to express the mapping relationship between the intermittent joint parameters and the slope safety factor. The training samples are obtained from the numerical calculation based on the joint finite element method during this process. Considering the randomness of the intermittent joint parameters in the… More >

Abid Sohail^1,*, Dhanapal Durai Dominic², Mohammad Hijji³, Muhammad Arif Butt⁴

CMC-Computers, Materials & Continua, Vol.69, No.1, pp. 1141-1157, 2021, DOI:10.32604/cmc.2021.018023

Abstract Enterprises are continuously aiming at improving the execution of processes to achieve a competitive edge. One of the established ways of improving process performance is to assign the most appropriate resources to each task of the process. However, evaluations of business process improvement approaches have established that a method that can guide decision-makers to identify the most appropriate resources for a task of process improvement in a structured way, is missing. It is because the relationship between resources and tasks is less understood and advancement in business process intelligence is also ignored. To address this problem an integrated resource classification… More >

Qingyuan Zhou^a, Jianjian Luo^b

Intelligent Automation & Soft Computing, Vol.24, No.1, pp. 133-138, 2018, DOI:10.1080/10798587.2016.1267444

Abstract Big data is an emerging paradigm applied to datasets whose size is beyond the ability of commonly used software tools to capture, manage, and process the data within a tolerable elapsed time. In a Smarter City, available resources are harnessed safely, sustainably and efficiently to achieve positive, measurable economic and societal outcomes. Most of the challenges of Big Data in Smart Cities are multi-dimensional and can be addressed from different multidisciplinary perspectives. Based on the above considerations, this paper combined the PSR method, the fuzzy logic model and the entropy weight method in an empirical study for feasible urban public… More >

Brett Snodgrass, Aruna Chilakala

Congenital Heart Disease, Vol.12, No.5, pp. 647-648, 2017, DOI:10.1111/chd.12522

Abstract This article has no abstract. More >

Qing Dong^{1, *}, Bin He¹, Gening Xu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.122, No.2, pp. 525-553, 2020, DOI: 10.32604/cmes.2020.08498

Abstract To compensate for the shortcomings of quasi-static law in anti-fatigue analysis of foundry crane metal structures, the fatigue life evaluation method of foundry crane metal structure considering load dynamic response and crack closure effect is proposed. In line with the theory of mechanical vibration, a dynamic model of crane structure during the working cycle is constructed, and dynamic coefficients under diverse actions are analysed. Calculation models of the internal force dynamic change process of dangerous cross-sections and a simulation model of first principal stress-time history are established by using the steel structure design criteria, which is utilised to extract the… More >

Wei Chen^{1, 2}, Tingzhu Sun^{1, 2}, Fangming Bi^{1, 2, *}, Tongfeng Sun^{1, 2}, Chaogang Tang^{1, 2}, Biruk Assefa^{1, 3}

Journal of New Media, Vol.1, No.1, pp. 35-44, 2019, DOI:10.32604/jnm.2019.05803

Abstract Image restoration is an image processing technology with great practical value in the field of computer vision. It is a computer technology that estimates the image information of the damaged area according to the residual image information of the damaged image and carries out automatic repair. This article firstly classify and summarize image restoration algorithms, and describe recent advances in the research respectively from three aspects including image restoration based on partial differential equation, based on the texture of image restoration and based on deep learning, then make the brief analysis of digital image restoration of subjective and objective evaluation… More >