Zhentao Chen¹, Weidong Lu^1,2,*, Yingwei Bao¹, Jun Zhang¹, Lu Wang¹, Kong Yue¹

Journal of Renewable Materials, Vol.10, No.1, pp. 89-104, 2022, DOI:10.32604/jrm.2021.015925 - 27 July 2021

Abstract The timber-concrete composite (TCC) slabs have become a preferred choice of floor systems in modern multi story timber buildings. This TCC slab consisted of timber and a concrete slab which were commonly connected together with inclined self-tapping screws (STSs). To more accurately predict the fire performance of TCC slabs, the mechanical behavior of TCC connections under high temperature was investigated by numerical simulation in this study. The interface slip of TCC connections was simulated by a proposed Finite Element (FE) model at room temperature, and different diameter and penetration length screws were considered. The effectiveness… More > Graphic Abstract

Jianping Sun¹, Jan Niederwestberg^2,*, Fangchao Cheng¹, Yinghei Chui²

Journal of Renewable Materials, Vol.8, No.3, pp. 319-328, 2020, DOI:10.32604/jrm.2020.08696 - 01 March 2020

Abstract Cross laminated timber (CLT) panels, which are used as load bearing plates and shear panels in timber structures, can serve as roofs, walls and floors. Since timber is construction material with relatively less stiffness, the design of such structures is often driven by serviceability criteria, such as deflection and vibration. Therefore, accurate vibration and elastic properties are vital for engineered CLT products. The objective of this research is to explore a method to determine the natural frequencies of orthotropic wood plates efficiently and fast. The method was developed based on vibration signal processing by wavelet More >

Yingchun Gong^1,#,*, Fenglu Liu^2,#, Zhaopeng Tian¹, Guofang Wu¹, Haiqing Ren¹, Cheng Guan²

Journal of Renewable Materials, Vol.7, No.10, pp. 941-956, 2019, DOI:10.32604/jrm.2019.07354

Abstract Japanese larch is one of the main plantation tree species in China. A lack of engineered wood products made by Japanese larch , limits its application in wood structures. In this study, based on optimum process para meters, such as pressure (1.2 MPa), adhesive spread rate (200 g/m 2 ) and adhesive (one component polyurethane), the mechanical properties of Japanese larch made cross laminated timber ( with different lay ups were evaluated by means of the static method . Results of this study show ed that variations in lay ups significant ly affected the mechanical… More >