Jinlong Shang^*

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.9, pp. 2315-2328, 2023, DOI:10.32604/fdmp.2023.026742

Abstract In this study, the durability of a new polymer carbon fiber-reinforced epoxy resin used to produce composite material in the aerospace field is investigated through analysis of the corrosion phenomena occurring at the microscopic scale, and the related infrared spectra and thermal properties. It is found that light and heat can contribute to the aging process. In particular, the longitudinal tensile strength displays a non-monotonic trend, i.e., it first increases and then decreases over time. By contrast, the longitudinal compressive and inter-laminar shear strengths do not show significant changes. It is also shown that the inter-laminar shear strength of carbon… More >

Toufik Sahabi^1,*, Smain Balaska²

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.4, pp. 977-990, 2023, DOI:10.32604/fdmp.2022.022059

Abstract The heat transfer equation is used to determine the heat flow by conduction through a composite material along the real axis. An analytical dimensionless analysis is implemented in the framework of a separation of variables method (SVM). This approach leads to an Eigenvalues problem that is solved by the Newton’s method. Two types of dynamics are found: An unsteady condition (in the form of jumps or drops in temperatures depending on the considered case), and a permanent equilibrium (tending to the ambient temperature). The validity and effectiveness of the proposed approach for any number of adjacent layers is also discussed.… More > Graphic Abstract

R. Selvam^1,*, L. Ganesh Babu², Joji Thomas³, R. Prakash¹, T. Karthikeyan¹, T. Maridurai⁴

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.3, pp. 569-577, 2023, DOI:10.32604/fdmp.2022.022187

Abstract Hybrid materials collected from organic and inorganic sources, which are traditionally used as brake lining materials, generally include fly ash, cashew shell powder, phenolic resins, aluminium wool, barites, lime powder, carbon powder and copper powder. The present research focuses on the specific effects produced by fly ash and aims to provide useful indications for the replacement of asbestos due to the health hazards caused by the related fibers. Furthermore, the financial implications related to the use of large-volume use of fly ash, lime stone and cashew shell powder, readily available in most countries in the world, are also discussed. It… More > Graphic Abstract

Yaoguo Liu¹, Yao Chen², Huifang Liu², Wei Chen¹, Zhiwei Lei², Chiyu Ma², Jie Yin¹, Wen Yang^2,*

Journal of Renewable Materials, Vol.11, No.2, pp. 811-823, 2023, DOI:10.32604/jrm.2022.022594

Abstract Citral (Eo) exhibits excellent fungicidal activities. However, it is difficult to maintain long-term fungicidal activity due to its strong volatility. Herein, a controlled-release strategy by using biomass-derived porous carbon (BC) was developed to overcome the drawback of Eo. New composite materials were prepared by loading Eo on tea stem porous carbon (BC@Eo), and their controlled-release fungicidal activity against Exobasidium vexans was assessed. BC with a large specific surface area of 1001.6 m²/g and mesoporous structure was fabricated through carbonization temperature of 700°C. The BC@Eo materials were characterized using Fourier-transform infrared spectroscopy and X-ray powder diffraction. The results suggested that chemical… More > Graphic Abstract

Sudhakar Muniyasamy¹, Andrew Anstey², Murali M. Reddy¹, Manju Misra^1,2, Amar Mohanty^1,2,*

Journal of Renewable Materials, Vol.1, No.4, pp. 253-272, 2013, DOI:10.7569/JRM.2013.634117

Abstract Lignocellulosic composites have attracted interest from both academia and industry due to their benefi cial environmental and sustainability attributes. The lignocellulosic industry has seen remarkable improvements in the development of composites for high performance applications. Both biodegradable as well as non-biodegradable polymers are used in the design and engineering of lignocellulosic composites. Biodegradability studies of lignocellulosic composites in soil and composting environments help in planning their end-life management. Biodegradability tests are complex and dependent on the environment in which the testing is carried out. Due to this, standards have been developed by international agencies such as the American Society for… More >

Henning Roedel¹, Isamar Rosa Plata¹, Michael Lepech^1,*, David Loftus²

Journal of Renewable Materials, Vol.3, No.3, pp. 183-194, 2015, DOI:10.7569/JRM.2015.634107

Abstract This article presents the sustainability assessment of a novel biocomposite material that is under investigation by NASA for use in construction in limited resource environments. The composite consists of soil particles solidified by a protein binding agent. Preliminary compressive strength data suggests the biocomposite could be used for numerous construction applications. To assess the biocomposite’s potential for use in sustainable construction, a comparative process-based life cycle assessment between biocomposite and concrete pavers was performed to analyze the life cycle primary energy and IMPACT 2002+ points of both types of pavers. Results show that the concrete pavers outperform the biocomposite pavers… More >

Lisheng Deng^1,2, Hongyu Huang^2,*, Zhaohong He², Shijie Li², Zhen Huang², Mitsuhiro Kubota³, You Zhou^4,*, Dezhen Chen¹

Journal of Renewable Materials, Vol.10, No.11, pp. 2895-2906, 2022, DOI:10.32604/jrm.2022.019071

Abstract Thermochemical heat storage material inorganic hydrate LiOH is selected as a promising candidate material for storing low-temperature heat energy because of its high energy density (1440 kJ/kg) and mild reaction process. However, the low hydration rate of LiOH limits the performance of low temperature thermochemical heat storage system as well as the thermal conductivity. In this study, porous-graphene/LiOH composite thermochemical heat storage materials with strong water sorption property and higher thermal conductivity were synthesized by hydrothermal process. The experimental results show that the hydration rate of the composites was greatly improved. The heat storage density of the composite materials was… More >

Jian Xiong^1,*, Jinshui Yang², Hui Li³, Wu Xu⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.132, No.2, pp. 357-359, 2022, DOI:10.32604/cmes.2022.023418

Abstract This article has no abstract. More >

R. Saveeth^1,*, S. Uma Maheswari²

Intelligent Automation & Soft Computing, Vol.34, No.2, pp. 983-1000, 2022, DOI:10.32604/iasc.2022.023455

Abstract In the aerospace industry, composite materials are becoming more common. The presence of a crack in an aircraft makes it weaker and more dangerous, and it can lead to complete fracture and catastrophic failure. To predict the position and depth of a crack, various methods have been developed. For aircraft repair, crack diagnosis is extremely important. Even then, due to uncertainties arising from sources such as environmental conditions, packing, and intrinsic material property changes, accurate diagnosis in real engineering applications remains a challenge. Deep learning (DL) approaches have demonstrated powerful recognition potential in a variety of fields in recent years.… More >

Songhua Hu^*, Lixiong Sun, Hongying Xiong^*

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.4, pp. 1083-1088, 2022, DOI:10.32604/fdmp.2022.019038

Abstract An analysis of a booster arm made of a carbon fiber reinforced epoxy composite material is conducted by means of a finite element analysis method. The mechanical properties are also determined through stretching and compression performance tests. It is found that the surface treatment of the fibers causes the silane coupling agent to undergo a chemical reaction on the surface of the glass fiber. The used material succeeds in producing significant vibrations damping (vibration attenuation effect is superior to that obtained with conventional alloy materials). More >