Cut Rahmawati^1,2,*, Lia Handayani³, Muhtadin⁴, Muhammad Faisal⁴, Muhammad Zardi¹, S. M. Sapuan⁵, Agung Efriyo Hadi⁶, Jawad Ahmad⁷, Haytham F. Isleem⁸

Journal of Renewable Materials, Vol.11, No.10, pp. 3751-3767, 2023, DOI:10.32604/jrm.2023.028987 - 10 August 2023

Abstract Waste Glass (WGs) and Coir Fiber (CF) are not widely utilized, even though their silica and cellulose content can be used to create construction materials. This study aimed to optimize mortar compressive strength using Response Surface Methodology (RSM). The Central Composite Design (CCD) was applied to determine the optimization of WGs and CF addition to the mortar compressive strength. Compressive strength and microstructure testing with Scanning Electron Microscope (SEM), Fourier-transform Infrared Spectroscopy (FT-IR), and X-Ray Diffraction (XRD) were conducted to specify the mechanical ability and bonding between the matrix, CF, and WGs. The results showed… More > Graphic Abstract

Ismail Shah^1,2, Jing Li^1,2,*, Shengyuan Yang¹, Yubo Zhang¹, Aftab Anwar^1,2

Journal of Renewable Materials, Vol.10, No.5, pp. 1307-1320, 2022, DOI:10.32604/jrm.2022.017513 - 22 December 2021

Abstract Recently, addition of various natural fibers to high strength concrete has aroused great interest in the field of building materials. This is because natural fibers are much cheaper and locally available, as compare to synthetic fibers. Keeping in view, this current research conducted mainly focuses on the static properties of hybridized (sisal/coir), sisal and coir fiber-reinforced concrete. Two types of natural fibers sisal and coir were used in the experiment with different lengths of 10, 20 and 30 mm and various natural fiber concentrations of 0.5%, 1.0%, and 1.5% by mass of cement, to investigate… More > Graphic Abstract

Xu Yan¹, Changheng Liu², Liang Qiao¹, Kaili Zhu², Hongsheng Tan^1,*, Shuhua Dong¹, Zhitao Lin¹

Journal of Renewable Materials, Vol.10, No.4, pp. 1039-1048, 2022, DOI:10.32604/jrm.2022.017239 - 02 November 2021

Abstract The crystallization behavior, crystal morphology and form, and viscoelastic behavior of poly(butylene succinate) (PBS) and coir fiber/PBS composites (CPB) were investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM), X-ray diffraction (XRD) and dynamic mechanical analysis (DMA). The results of DSC measurement show that the crystallization temperature increases with the filling of coir fibers. POM images reveal that the spherulitic size and crystallization behavior of PBS are influenced by the coir fibers in the composites. XRD curves show that the crystal form of pure PBS and CPB are remaining almost identical. In addition, the More >

Ilyas Renreng¹, Bakri Bakri^2,*, Sri Chandrabakty², Naharuddin²

Journal of Renewable Materials, Vol.9, No.2, pp. 325-335, 2021, DOI:10.32604/jrm.2021.012774 - 15 December 2020

Abstract In this study, the influence of sodium hydroxide (NaOH) treatment and microwave treatment of coir fibers on the mechanical and physical properties of pressed coir fiber/epoxy composite were evaluated. The composite was fabricated with a hand lay-up method with compression molding. Before composite fabrication, pressed coir fiber was treated with NaOH and microwave treatments. Mechanical testing (tensile, flexural, and impact testing) of the composite was conducted. Then, water absorption and thickness swelling testing are also performed. The fractured composite surface morphology after the tensile test was analyzed by scanning electronic microscopy (SEM). The results revealed… More >