Zhihai He^1,2, Menglu Shen¹, Jinyan Shi^3,*, Jingyu Chang¹, Víctor Revilla-Cuesta⁴, Osman Gencel⁵

Journal of Renewable Materials, Vol.11, No.4, pp. 1835-1852, 2023, DOI:10.32604/jrm.2023.024887 - 01 December 2022

Abstract Recycling solid waste in cement-based materials cannot only ease its load on the natural environment but also reduce the carbon emissions of building materials. This study aims to investigate the effect of recycled glass powder (RGP) on the early-age mechanical properties and autogenous shrinkage of cement pastes, where cement is replaced by 10%, 20% and 30% of RGP. In addition, the microstructure and nano-mechanical properties of cement paste with different RGP content and water to binder (W/B) ratio were also evaluated using SEM, MIP and nanoindentation techniques. The results indicate that the early-age autogenous shrinkage… More > Graphic Abstract

Fatih Çelik^1,*, Oğuzhan Yıldız², Andaç Batur Çolak³, Samet Mufit Bozkır¹

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.1, pp. 135-158, 2023, DOI:10.32604/fdmp.2022.021014 - 02 August 2022

Abstract In this study, the workability of cement-based grouts containing n-TiO₂ nanoparticles and fly ash has been investigated experimentally. Several characteristic quantities (including, but not limited to, the marsh cone flow time, the mini slump spreading diameter and the plate cohesion meter value) have been measured for different percentages of these additives. The use of fly ash as a mineral additive has been found to result in improvements in terms of workability behavior as expected. Moreover, if nano titanium oxide is also used, an improvement can be obtained regarding the bleeding values for the cement-based grout mixes. More >