Can Kang^1,*, Shifeng Yan¹, Haixia Liu², Jie Chen², Kejin Ding³

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.11, pp. 2431-2442, 2024, DOI:10.32604/fdmp.2024.055688 - 28 October 2024

Abstract The presented study aims to reveal the effect of liquid temperature on cavitation-induced erosion of an Al-Mg alloy. An experimental work was conducted using a submerged cavitating waterjet to impact the specimen surface. For a certain cavitation number and a given standoff distance, different liquid temperatures were considered. Accordingly, a comprehensive comparison was implemented by inspecting the mass loss and surface morphology of the tested specimens. The results show that the cumulative mass loss increases continuously with the liquid temperature. A cavitation zone with an irregular profile becomes evident as the cavitation treatment proceeds. Increasing More > Graphic Abstract

Ivan Sboev^1,*, Tatyana Lyubimova^2,3, Konstantin Rybkin³, Michael Kuchinskiy^2,3

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.6, pp. 1425-1439, 2024, DOI:10.32604/fdmp.2024.051341 - 27 June 2024

Abstract The intensification of physicochemical processes in the sonochemical reactor chamber is widely used in problems of synthesis, extraction and separation. One of the most important mechanisms at play in such processes is the acoustic cavitation due to the non-uniform distribution of acoustic pressure in the chamber. Cavitation has a strong impact on the surface degradation mechanisms. In this work, a numerical calculation of the acoustic pressure distribution inside the reactor chamber was performed using COMSOL Multiphysics. The numerical results have revealed the dependence of the structure of the acoustic pressure field on the boundary conditions More > Graphic Abstract