Ling Wang^1,2, Shenglong Jiang², Chenchen Huang², Pengyuan Dai², Fenghua Liu^2,*, Xiaopeng Qi¹, Gaojie Xu²

Journal of Renewable Materials, Vol.8, No.11, pp. 1505-1518, 2020, DOI:10.32604/jrm.2020.010544

Abstract The paper discusses the mechanical and thermal performance manifested in natural nanorods attapulgite (ATP) reinforced Acrylonitrile butadiene styrene (ABS) nanocomposites in the process of fused deposition modeling (FDM). Molten extrusion technique was taken to manufacture the filaments of ABS/organic-attapulgite (OAT) nanocomposites with different mass fraction and the printing operation was made by one commercial FDM three-dimensional (3D) printer. Results indicate that the mechanical performance of these FDM 3D printed specimens are improved obviously via the introduction of OAT, and tensile strength of the ABS/OAT nanocomposites parts with only 2 wt% OAT addition is enhanced by 48.1%. At the same time,… More >

Kinjal Parikh^1,2,*, Juan Carlos Muniz^1,2, Elizabeth Welch^1,2, Abdul Aldousany^1,3, Nao Sasaki^1,2

Congenital Heart Disease, Vol.15, No.5, pp. 339-346, 2020, DOI:10.32604/CHD.2020.012910

Abstract This is a newborn male prenatally diagnosed with severe right ventricular (RV) hypertrophy and depressed function, aneurysmal dilation of the main pulmonary artery and tachyarrhythmia. Postnatally, he required immediate intubation and inotropic support. Echocardiogram revealed a large dysplastic RV, absent pulmonary valve syndrome (APVS), markedly dilated pulmonary arteries and tricuspid atresia (TA). The trabecular portion of the RV was excessively trabeculated and severely dilated. Inflow and infundibular walls were thin, with multiple infundibular aneurysms. There was APVS with free regurgitation and massively dilated pulmonary arteries. The RV bulged into the LV, though there was no outflow tract obstruction. The LV… More >

Ahmad Alomari^1,∗, Alain April¹, Carlos Monsalve², Amjad Gawanmeh³

Computer Systems Science and Engineering, Vol.33, No.3, pp. 219-227, 2018, DOI:10.32604/csse.2018.33.219

Abstract Decision trees are among the best-known decision-making techniques and have been used extensively for both data analysis and predictive modeling. BPM+ is a novel process modeling approach that helps represent business process models in a consistent and structured way to meet different stakeholders’ process representation needs. This paper reports on the outcomes of an ontological analysis of the potential use of decision-tree representations as a new BPM+ perspective for the operational level of abstraction. This new perspective effectively demonstrates how a specialized/operational BPM stakeholder perspective can be used to improve the existing organizational business process model repository. More >

Muhammad Ashraf¹, Amir Abbas¹, Saqib Zia², Yu-Ming Chu^{3, 4}, Ilyas Khan^{5, *}, Kottakkaran Sooppy Nisar⁶

CMC-Computers, Materials & Continua, Vol.65, No.2, pp. 1809-1823, 2020, DOI:10.32604/cmc.2020.011404

Abstract The present study is concerned with the physical behavior of the combined effect of nano particle material motion and heat generation/absorption due to the effect of different parameters involved in prescribed flow model. The formulation of the flow model is based on basic universal equations of conservation of momentum, energy and mass. The prescribed flow model is converted to non-dimensional form by using suitable scaling. The obtained transformed equations are solved numerically by using finite difference scheme. For the analysis of above said behavior the computed numerical data for fluid velocity, temperature profile, and mass concentration for several constraints that… More >

Zinta Zimele^1,*, Ilze Irbe², Juris Grinins², Oskars Bikovens², Anrijs Verovkins², Diana Bajare¹

Journal of Renewable Materials, Vol.8, No.9, pp. 1067-1076, 2020, DOI:10.32604/jrm.2020.09646

Abstract Novel mycelium-based biocomposites (MBB) were obtained from local agricultural (hemp shives) and forestry (wood chips) by-products which were bounded together with natural growth of fungal mycelium. As a result, hemp mycocomposites (HMC) and wood mycocomposites (WMC) were manufactured. Mechanical, water absorption and biodegradation properties of MBB were investigated. MBB were characterized also by ash content and elemental composition. The results of MBB were compared with the reference materials such as the commercial MBB material manufactured by Ecovative^® Design (EV), hemp magnesium oxychloride concrete (HC) and cemented wood wool panel (CW), manufactured by CEWOOD^®. The mechanical properties of HMC and WMC… More >

Mohamed Abbas^1,3,*, Ali Algahtani^2,6, Amir Kessentini^2,4,7, Hassen Loukil^1,5, Muneer Parayangat¹, Thafasal Ijyas¹, Abdul Wase Mohammed¹

CMES-Computer Modeling in Engineering & Sciences, Vol.124, No.2, pp. 683-701, 2020, DOI:10.32604/cmes.2020.010304

Abstract Every new generation of antennas is characterized by increased accuracy and faster transmission speeds. However, patch antennas have been known to damage human health. This type of antenna sends out electromagnetic waves that increase the temperature of the human head and prevent nerve strands from functioning properly. This paper examines the effect of the communication between the patch antenna and the brain on the head’s temperature by developing a hypothetical multi-input model that achieves more accurate results. These inputs are an individual’s blood and tissue, and the emission power of the antenna. These forces depend on the permeability and conductivity… More >

Dzun Noraini Jimat^*, Sharifah Shahira Syed Putra, Parveen Jamal, Wan Mohd Fazli Wan Nawawi, Mohammed Saedi Jami

Journal of Renewable Materials, Vol.8, No.7, pp. 739-757, 2020, DOI:10.32604/jrm.2020.010357

Abstract Increasing usage of foams in various industry sectors had causing serious disposal problems once it reaches the end of its life-cycle. Herein, PVA-MFC foam was prepared by freeze-drying using polyvinyl alcohol (PVA) and microfibrillated cellulose (MFC) as a reinforced material from sugarcane bagasse (SCB). In this study, the PVA-MFC foam was chemically silylated with Y-methacryloxypropyltrimethoxysilane (MPS) and tetraethoxysilane (TEOS). The wetting ability and mechanical strength of the silylated _2,20PVA-MFC foam was greatly enhanced compared with unmodified _2,20PVA-MFC foam. The silane chemicals (MPS and TEOS) had been confirmed grafted on _2,20PVA-MFC foam due to the presence of Si-C and Si-O-C stretching… More >

Haikuan Wu^1,2, Changwu Liu^1,2,*, Song Shi^1,2, Kangliang Chen^1,2

Journal of Renewable Materials, Vol.8, No.7, pp. 727-738, 2020, DOI:10.32604/jrm.2020.09589

Abstract In order to study the effect of recycled plastic particles on the physical and mechanical properties of concrete, recycled plastic concrete with 0, 3%, 5% and 7% content (by weight) was designed. The compressive strength, splitting tensile strength and the change of mass caused by water absorption during curing were measured. The results show that the strength of concrete is increased by adding recycled plastic into concrete. Among them, the compressive strength and the splitting tensile strength of concrete is the best when the plastic content is 5%. With the increase of plastic content, the development speed of early strength… More >

Bin Zhang^*, Yongzhen Wang, Jiaqing Zheng, Dan Liu

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.3, pp. 665-674, 2020, DOI:10.32604/fdmp.2020.09314

Abstract The relationship among the working temperature, pressure and current density of a Solid oxide fuel cell (SOFC) and its output power and efficiency are analyzed in the framework of a theoretical model able to provide, among other things, the volt ampere characteristic curve. In particular, following the principle of temperature matching and cascade utilization, we consider a gas turbine (GT) and a LiBr absorption chiller to recycle the high-grade exhaust heat produced by the considered SOFC. This distributed total energy system is set up with the intent to meet typical needs of buildings for cooling, heating and power (CCHP). The… More >

Anoymous

Congenital Heart Disease, Vol.12, No.5, pp. 649-691, 2017, DOI:10.1111/chd.12538

Abstract This article has no abstract. More >