Nobuhito Nagasato¹, Zhengyuan Pei¹, Yasushi Koito^2,*

Frontiers in Heat and Mass Transfer, Vol.22, No.1, pp. 49-63, 2024, DOI:10.32604/fhmt.2024.047502 - 21 March 2024

Abstract Visualization experiments were conducted to clarify the operational characteristics of a polymer pulsating heat pipe (PHP). Hydrofluoroether (HFE)-7100 was used as a working fluid, and its filling ratio was 50% of the entire PHP channel. A semi-transparent PHP was fabricated using a transparent polycarbonate sheet and a plastic 3D printer, and the movements of liquid slugs and vapor plugs of the working fluid were captured with a high-speed camera. The video images were then analyzed to obtain the flow patterns in the PHP. The heat transfer characteristics of the PHP were discussed based on the… More >

Nataša Knez¹, Mirko Kariž², Friderik Knez¹, Nadir Ayrilmis^3,*, Manja Kitek Kuzman^2,*

Journal of Renewable Materials, Vol.9, No.11, pp. 1883-1895, 2021, DOI:10.32604/jrm.2021.016128 - 04 June 2021

Abstract The effects of selected printing parameters on the fire properties of additively produced composites from neat polylactic acid (PLA) and wood/PLA filaments were investigated. The reaction to fire of the 3D-printed specimens was tested according to the ISO 5660-1 cone calorimeter test method. The results showed that the properties of the specimens when exposed to fire were significantly affected by the incorporation of wood flour into the PLA filament. It was also interesting that PLA specimens had much better reactions to fire than the wood/PLA specimens. Time to ignition was found to be much longer More >

Ryosuke Matsuzaki^1,*, Taishi Nakamura¹, Yusuke Yamagata¹, Akira Todoroki², Masahito Ueda³, Yoshiyasu Hirano⁴

The International Conference on Computational & Experimental Engineering and Sciences, Vol.22, No.4, pp. 171-171, 2019, DOI:10.32604/icces.2019.05205

Abstract When continuous carbon fiber composites are molded with a 3D printer, three-dimensional complex structure can be integrally molded, which leads to reduction of manufacturing time and cost. In addition, because the curved continuous fibers can be printed in a plane when the 3D printer is utilized, the design space and capability of 3D printed composites will drastically expand compared with using just straight fibers such as conventional prepreg. However, printing accuracy of composite materials may be affected uniquely by parameters such as number of fibers in tow, printing curvature, compaction pressure etc. In this study,… More >