Husam Abdulrasool Hasan^a,*, Jenan S. Sherza^a, Lammiaa Abdulrudah Abd^a, Kayser Aziz Ameen^a, Azher M. Abed^b, Ali Arif hatem^a, Kamaruzzaman Sopian^c

Frontiers in Heat and Mass Transfer, Vol.18, pp. 1-8, 2022, DOI:10.5098/hmt.18.45

Abstract In a Fresnel-based Concentrated Photovoltaic system, multi junction solar cells suffer from increased PV temperature, resulting in a decrease its electrical efficiency. This study design to investigate the influence of using Water/Al₂O₃ Nanofluid as cooling fluid on heat transfer enhancement and top surface temperature for multi-junction solar cell in the Fresnel-based Concentrated Photovoltaic thermal CPVt System. The CFD simulation was conducted on mini-channel under the concentrated multi-junction solar cell with using water/Al₂O₃ Nanofluid and pure water as coolant fluids. The Reynolds number is in the range of 15000-30000 were examined. The average Nusselt numbers augmented through… More >

Yun Hao^* , Shaohua Lv, Song Wu

Frontiers in Heat and Mass Transfer, Vol.18, pp. 1-8, 2022, DOI:10.5098/hmt.18.3

Abstract Traditional methods of enhancing the thermal efficiency of heating furnaces in continuously producing oilfields, such as replacing existing units with more efficient units or renovating old furnaces, are highly inconvenient. This paper studied on the characteristics of nanofluids, a novel heat transfer medium with excellent heat transfer characteristics to enhance the thermal efficiency of heating furnaces. The stable nanofluids (Al₂O₃-H₂O, SiO₂- H₂O, and TiO₂-H₂O) were prepared by a two-step method and various chemical and physical treatments were carried out. Thermal conductivities of the nanofluids were measured using the transient hot-wire method. Based on the analysis, the most More >

Namphon Pipatpaiboon^a , Teerapat Chompookham^b, Sampan Rittidech^b, Yulong Ding^c, Thanya Parametthanuwat^d, Surachet Sichamnan^a,*

Frontiers in Heat and Mass Transfer, Vol.19, pp. 1-9, 2022, DOI:10.5098/hmt.19.24

Abstract When nanofluid (NF) is used as the working fluid in a rectangular two-phase closed thermosyphon (RTPCT), the formations and heat performance of two-phase flow patterns are explored qualitatively. Silver nanoparticles were mixed with deionized water at a concentration of 0.5 wt% in the NF. Nanoparticles improved the thermal contact surface area within the base flow, allowing the base fluid to boil quickly and easily. When the working fluid was boiled, NF also demonstrated high thermal conductivity capabilities, which diffused and moved along with the dual flow patterns. As a result, these qualities improved the RTPCT's More >

H. Astuti^a, P. Sri^b, S. Kaprawi^a,†

Frontiers in Heat and Mass Transfer, Vol.13, pp. 1-8, 2019, DOI:10.5098/hmt.13.3

Abstract The natural convection of the nanofluids from a vertical accelerated plate in the presence of the radiation flux and magnetic field is observed in this study. Initially, the plate with a temperature higher than the temperature of nanofluids is at rest and then it accelerates moving upward and then the wall temperature decreases. The governing unsteady equations are solved by the explicit method based on the forward finite difference. Three different types of water-based nanofluids containing copper Cu, aluminum oxide Al₂O₃ and titanium dioxide TiO₂ are taken into consideration. The hydrodynamic and thermal performance of the More >

N. Vedavathi^a , G. Dharmaiah^b,* , K.S. Balamurugan^c, J. Prakash^d

Frontiers in Heat and Mass Transfer, Vol.9, pp. 1-8, 2017, DOI:10.5098/hmt.9.38

Abstract The effects of radiation absorption, first order chemical reaction and diffusion thermo on MHD free convective heat and mass transfer flow of a nanofluid past a semi infinite vertical flat plate are analyzed. The temperature and concentration at the surface are assumed to be oscillatory type. Four types of cubic nano particles which are uniform and size namely, Silver (Ag), Aluminum (Al₂O₃), Copper (Cu) and Titanium Oxide (TiO₂) with water as a base fluid is taken into account. The set of ordinary differential equations are solved by using regular perturbation technique. The impact of various flow More >

Seyed Milad Mirabedin^*

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-6, 2016, DOI:10.5098/hmt.7.17

Abstract This work focuses on numerical validation of natural convection heat transfer of TiO2-water nanofluids in a cylindrical container using COMSOL. The main aim of this study is to examine different available approaches to calculate effective thermal conductivity and compare them with experimental data available in the literature. Simulation results show that for considered mixture, average Nusselt number decreases by increasing Rayleigh number and particle volume fraction. It has been found that only one model was able to represent similar trends for given particle volume fractions, compared to experimental results. More >