Open Access

ARTICLE

The Characteristics of Glued Tensile Shear Strength Constituted of Wood Cut by CO₂ Laser

Fatemeh Rezaei^1,2,*, Milan Gaff^1,3,4,*, Róbert Nemeth⁵, Jerzy Smardzewski⁶, Peter Niemz⁷, Haitao Li^8,9, Anil Kumar Sethy^1,10, Luigi Todaro¹¹, Gourav Kamboj¹, Sumanta Das¹, Roberto Corleto¹, Gianluca Ditommaso¹, Miklós Bak⁵

1 Department of Wood Processing, Faculty of Forestry and Wood Sciences, Czech University of Life Sciences Prague, Prague, 16521, Czech Republic
2 Department of Wood Science and Engineering, Oregon State University, Corvallis, OR, USA
3 Department of Furniture, Design and Habitat Brno, Mendel University in Brno, Brno, 61300, Czech Republic
4 Experimental Centre, Faculty of Civil Engineering, Czech Technical University in Prague, Prague, 16629, Czech Republic
5 Institute of Wood Technology and Technical Sciences, University of Sopron, Sopron, 9400, Hungary
6 Department of Furniture Design, Faculty of Forestry and Wood Technology, Poznan University of Life Sciences, Poznan, 60637, Poland
7 ETH Zurich, Institute for Building Materials, Lulea University of Technology, Zurich, CH, 8093, Switzerland
8 School of Civil Engineering, Nanjing Forestry University, Nanjing, China
9 Joint International Research Laboratory of Bio-Composite Building Materials and Structures, Nanjing Forestry University, Nanjing, China
10 Wood Properties and Processing, Institute of Wood Science and Technology, Bangalore, 560003, India
11 School of Agricultural Forestry, Food, and Environmental Science, University of Basilicata, Potenza, 85100, Italy

* Corresponding Authors: Fatemeh Rezaei. Email: ; Milan Gaff. Email: