Open Access
ARTICLE
Characteristics of Biopellets Manufactured from Various Lignocellulosic Feedstocks as Alternative Renewable Energy Sources
1 Department of Forest Products, Faculty of Forestry, Universitas Sumatera Utara. Kampus USU Padang Bulan, Medan, 20155, Indonesia
2 Research Center for Biomass and Bioproducts, National Research and Innovation Agency (BRIN), Jl Raya Bogor KM 46 Cibinong, Bogor, 16911, Indonesia
3 Department of Wood Industry, Faculty of Applied Sciences, Universiti Teknologi MARA (UiTM), Cawangan Pahang Kampus Jengka, Shah Alam, 26400, Malaysia
4 Faculty of Forest Industry, University of Forestry, Sofia, 1797, Bulgaria
* Corresponding Authors: Apri Heri Iswanto. Email: ; Petar Antov. Email:
(This article belongs to the Special Issue: Advances in Eco-friendly Wood-Based Composites: Design, Manufacturing, Properties and Applications – 2024)
Journal of Renewable Materials 2024, 12(6), 1103-1123. https://doi.org/10.32604/jrm.2024.051077
Received 27 February 2024; Accepted 28 April 2024; Issue published 02 August 2024
Abstract
The increased valorization of renewable and cost-effective lignocellulosic feedstocks represents a viable, sustainable, and eco-friendly approach toward the production of biopellets as alternative energy sources. The aim of this research work was to investigate and evaluate the feasibility of using various lignocellulosic raw materials, i.e., raru (Cotylelobium melanoxylon), mangrove (Rhizophora spp.), sengon (Paraserianthes falcataria), kemenyan toba (Styrax sumatrana), oil palm (Elaeis guineensis), manau rattan (Calamus manan), and belangke bamboo (Gigantochloa pruriens) for manufacturing biopellets with different particle sizes. The raw materials used were tested for their moisture content, specific gravity, ash, cellulose, and lignin content. In addition, thermal analyses, i.e., calorific values, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC), were performed. The following properties of the biopellets produced were investigated: moisture content, volatile matter, ash content, fixed carbon, density, and thermal analyses. Based on an analysis of the raw materials, raru had the lowest moisture content (12%) and ash content (1.5%) and the highest specific gravity (1.2). Markedly, palm oil stem had the highest α-cellulose (55%) and lignin (37%) content. In accordance with the SNI 8675:2018 standard requirements, biopellets with optimal properties (moisture content of 1.4%, ash content of 0.79%, density of 1.09 g/m, calorific value of 4672 cal/g, and TGA residue of 13.9%), were manufactured from raru wood.Keywords
Cite This Article
![cc](https://www.techscience.com/static/images/cc.jpg?t=20230215)
This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.