Open Access

ARTICLE

The Microparticles SiOx Loaded on PAN-C Nanofiber as Three-Dimensional Anode Material for High-Performance Lithium-Ion Batteries

Jiahao Wang¹, Jie Zhou², Zhengping Zhao^2,*, Feng Chen¹, Mingqiang Zhong¹

1 College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou, 310014, China
2 Zhijiang College of Zhejiang University of Technology, Shaoxing, 312000, China

* Corresponding Author: Zhengping Zhao. Email:

Journal of Renewable Materials 2023, 11(8), 3309-3332. https://doi.org/10.32604/jrm.2023.027278

Received 22 October 2022; Accepted 25 November 2022; Issue published 26 June 2023

Abstract

Three-dimensional C/SiOx nanofiber anode was prepared by polydimethylsiloxane (PDMS) and polyacrylonitrile (PAN) as precursors via electrospinning and freeze-drying successfully. In contrast to conventional carbon covering Si-based anode materials, the C/SiOx structure is made up of PAN-C, a 3D carbon substance, and SiOx loading steadily on PAN-C. The PAN carbon nanofibers and loaded SiOx from pyrolyzed PDMS give increased conductivity and a stable complex structure. When employed as lithium-ion batteries (LIBs) anode materials, C/SiOx-1% composites were discovered to have an extremely high lithium storage capacity and good cycle performance. At a current density of 100 mA/g, its reversible capacity remained at 761 mA/h after 50 charge-discharge cycles and at 670 mA/h after 200 cycles. The C/SiOx-1% composite aerogel is a particularly intriguing anode candidate for high-performance LIBs due to these appealing qualities.

---

Graphical Abstract

---

Keywords

---