Open Access iconOpen Access

ARTICLE

crossmark

Corrosion Protection of 5083 AA in Saline Water by Polyacrylonitrile Nanofibers

Enas H. Ali, Juman A. Naser*, Zainab W. Ahmed, Taki A. Himdan

Department of Chemistry, College of Education for Pure Science-Ibn Al-Haitham, University of Baghdad, Baghdad, Iraq

* Corresponding Authors: Juman A. Naser. Email: email; email

(This article belongs to this Special Issue: Current Advances in Green Nanomaterials Applications)

Journal of Renewable Materials 2021, 9(11), 1927-1939. https://doi.org/10.32604/jrm.2021.015624

Abstract

Polymeric nanofibers are a promising technology to protect the metal surfaces from corrosion. Through the literature search, the use of polyacrylonitrile nanofibres (PANNFs) as a corrosion inhibitor coating for aluminum alloys has not been evaluated. This work includes the development of a new, lightweight, high surface area and efficient coating of PANNFs that produced using electrospinning process to resist the corrosion of aluminum alloys (AA5083) which immersed in 0.6 M NaCl at alkaline medium (pH = 12) and acidic medium (pH = 1) at a range of temperatures (293–323) K. The PANNFs coating was successfully deposited on AA 5083 specimens, where these samples were considered as a collector electrode in the electrospinning process. The corrosion experiments of the aluminum alloys coated with PANNFs before and after immersion in both corrosive mediums were investigated using cyclic potential polarization (CPP). The results confirmed that the PANNFs coating was able to protect the surface of the aluminum specimens from corrosion, by reducing the corrosion current and increasing the surface polarization resistance, thus reducing the corrosion rate. The protection efficiency was found in the alkaline medium 98.8% while in the acidic medium 83.3%. So, it was in both mediums decreased with the increase in temperature. The shape, distribution and size of the polymeric nanofibers that formed the coating were also examined using field emission scanning electron microscopy (FE-SEM) and the percentages of the structural components of these fibers were detected using the X-ray dispersion spectroscopy (EDS). The surface of aluminum specimens was completely covered by PANNFs. These electrospun nanofibers have worn out and lined up spacing after immersion in the corrosive mediums. The diameters average of PANNFs was found to be about 200 and 150 nm before and after immersion, respectively.

Keywords


Cite This Article

Ali, E. H., Naser, J. A., Ahmed, Z. W., Himdan, T. A. (2021). Corrosion Protection of 5083 AA in Saline Water by Polyacrylonitrile Nanofibers. Journal of Renewable Materials, 9(11), 1927–1939.



cc This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • 2160

    View

  • 1278

    Download

  • 0

    Like

Share Link