Open Access

ARTICLE

Santhanakrishnan Mamallan¹, Venkateshwaran Narayanan^1,*, Canungo Bhimarao Ragothaman²
Journal of Polymer Materials, Vol.41, No.3, pp. 105-116, 2024, DOI:10.32604/jpm.2024.056744 - 30 September 2024
Abstract Glass fabric/polymer composites are widely used in various industrial applications due to their lightweight, exceptional strength, and fatigue resistance. Graphene nanoplatelets, a recently developed type of carbon material, stand out as unique nanofillers due to their 2D quantum confinement and expansive surface area within a polymer matrix. These features make them more effective than traditional carbon nanofillers at enhancing a range of properties. In this study, 3-weight % of graphene nanoplatelets with epoxy resin were used for investigation by varying sonication durations (0, 20, 40, and 60 min) using an ultrasonic bath sonicator. The laminates More >

View

368

Download

147

Open Access

ARTICLE

Yusuf Olanrewaju Busari^1,2,*, Issah Sadiq Ibrahim¹, Kabir S. Ajao¹, Norliana Mohd Abbas², James Obafemi Adegbola¹, Hassan Kobe Ibrahim³, Abdallah Reghioua⁴, Yusuf Lanre Shuaib-Babata¹, Rachael Oluwatoyosi Idowu¹
Journal of Polymer Materials, Vol.41, No.3, pp. 117-129, 2024, DOI:10.32604/jpm.2024.055895 - 30 September 2024
Abstract The research paper focuses on manufacturing composite materials from waste polyethylene terephthalate (PET) reinforced with soda-lime glass to provide a lightweight, less brittle, and high rust resistance when exposed to hazardous environment. In developing nations such as Nigeria, there is a significant surge in the volume of bottled water and other packaging materials used in households, leading to a rapid accumulation of biodegradable waste, that presents concerns such as the creation of landfills and health issues. PET are thermoplastic polymer that can be melted and shaped into various objects. This study involves the incorporation of… More >

View

322

Download

154

Open Access

ARTICLE

Ravikumar Karthikeyan, Subbiah Rajkumar^*, Balasundaram Ravi
Journal of Polymer Materials, Vol.41, No.3, pp. 131-141, 2024, DOI:10.32604/jpm.2024.055989 - 30 September 2024
Abstract In this study, the Polyamide-12 (PA-12) powdered material in the Selective Laser Sintering (SLS) process has been incorporated as the filler in the composite material to enhance its properties. The PA-12 powder has been made into a form of filament and is primarily used in the Fused Deposition Modelling (FDM) process. The PA-12 has been used with epoxy resin and glass fiber with different proportions. The characterization of materials, including the validation of the presence of PA-12 filler with epoxy, has been evidenced using Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and Thermogravimetric More >

View

407

Download

114

Open Access

ARTICLE

Rachid Bouregba^1,2, Bel Abbes Bachir Bouiadjra^2,*, Mohamed Mokhtar Bouziane³, Mohamed Amine Bellali², Mokadem Salem²
Journal of Polymer Materials, Vol.41, No.3, pp. 143-158, 2024, DOI:10.32604/jpm.2024.056385 - 30 September 2024
Abstract The use of polypropylene composites in various industrial fields has expanded considerably in recent years. A number of researches have been carried out to characterize the performance of polypropylene and its composites. However, the effects of ageing on the long-term behaviour of this thermoplastic are not well understood. The purpose of this study is to analyse the consequences of thermal degradation on the thermal and mechanical properties of three distinct materials: virgin Polypropylene (PP), virgin Polypropylene + talc (PP/talc), and virgin Polypropylene + Carbon Black (PP/CB) micro-composites. Specimens of these materials underwent exposure in an… More >

View

287

Download

111

Open Access

ARTICLE

Manivasagam Vishwa Rohini^1,#, Sathish Kiruba¹, Danniel Santhanaraj¹, Prakash Priyanka Nair¹, P. Sudhakara^2,*, Jujhar Singh³, Balamurugan Rathinam^4,*, Vanaraj Ramkumar^5,6,#
Journal of Polymer Materials, Vol.41, No.3, pp. 159-178, 2024, DOI:10.32604/jpm.2024.054801 - 30 September 2024
Abstract The Cavendish banana, Musa acuminata, is a climacteric fruit that ripens quickly after harvest. Due to their high perishability and susceptibility to disease, bananas have substantial postharvest losses. After harvesting, it is important to extend the bananas’ shelf life. Unique coating gel solutions based on glycerol and ascorbic acid were developed to accomplish this. Chitosan mixed with glacial acetic acid, lactic acid, and sodium alginate were among the gel solutions in these combinations. The goal was to improve banana preservation while maintaining freshness and quality by implementing innovative formulations and techniques. The fruits are hand-dried and… More >

View

266

Download

99

Open Access

ARTICLE

Anuraag Moturi, Dharmesh R. Chejara^*
Journal of Polymer Materials, Vol.41, No.3, pp. 179-190, 2024, DOI:10.32604/jpm.2024.055887 - 30 September 2024
Abstract A chitosan and guar protein isolate blend conjugate (Ch/GPI-Glu) based membrane has been designed and studied for its possible interaction with this biopolymer mixture. The designed conjugate chitosan/guar protein isolate blended membrane was investigated for its structural features using Fourier Transform Infrared Spectroscopy (FTIR), Thermal Gravimetric Analysis (TGA), X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) analyses. IR Spectroscopic data suggested that chitosan and guar protein isolate contributed to a specific intermolecular interaction. The designed membrane was water-insoluble and it exhibited strong polymer–protein interaction. Further, the membrane was also found to have a smooth morphology More >

View

240

Download

98

Open Access

ARTICLE

Yuanyuan Feng¹, Bingli Pan^1,*, Hongyu Liu^1,2, Yuxuan Zhou¹, Xiaofan Ding¹, Xinyu Yuan¹
Journal of Polymer Materials, Vol.41, No.3, pp. 191-203, 2024, DOI:10.32604/jpm.2024.055558 - 30 September 2024
Abstract In this paper, knitted aramid fiber (AF) was used as the support, and graphene oxide (GO) was loaded on the support by the polydopamine (PDA) method. Epoxy resin (EP) was poured to obtain composite materials. The tribological and mechanical properties of the composites were tested, and the wear surface of the composites was characterized by scanning electron microscopy (SEM) and three-dimensional morphology. The results show that knitted AF can markedly improve the mechanical properties of the composites. As a two-dimensional material, GO plays an effective lubrication role, and GO effectively enhances the tribological properties of… More >

View

252

Download

84

Open Access

RETRACTION

JPM Editorial Office
Journal of Polymer Materials, Vol.41, No.3, pp. 205-205, 2024, DOI:10.32604/jpm.2024.058921 - 30 September 2024
Abstract This article has no abstract. More >

View

167

Download

81