Table of Content

Open Access iconOpen Access

ABSTRACT

The Tribological and Fatigue Properties of Steel modified by Hybrid Surface Modification combining Super Rapid Induction Heating & Quenching and DLC coating

T. Aizawa1, H. Akebono2, H.Suzuki1

Department of system engineering, Faculty of engineering, Ibaraki University, Japan
Department of mechanical system engineering, Hiroshima University, Japan

The International Conference on Computational & Experimental Engineering and Sciences 2008, 5(4), 193-198. https://doi.org/10.3970/icces.2008.005.193

Abstract

In order to achieve power transmission parts like a compact gearwheel which indicates high performance properties, hybrid surface modification was performed by combining Super Rapid Induction Heating & Quenching(SRIQ) which creates high fatigue strength and Diamond Like Carbon (DLC) coating which are well known for their high hardness, low friction and excellent wear resistance. And, in order to prevent the base material from decreasing its fatigue strength, DLC was coated by using Unbalanced Magnetron Sputtering (UBMS) method which can coat at low temperature. Rotational bending fatigue tests and friction-wear tests were carried out. It was clear that it is possible to keep high fatigue strength and to create excellent tribological properties at specimen surface by performed hybrid surface modification.

Cite This Article

APA Style
Aizawa, T., Akebono, H., H.Suzuki, (2008). The tribological and fatigue properties of steel modified by hybrid surface modification combining super rapid induction heating & quenching and DLC coating. The International Conference on Computational & Experimental Engineering and Sciences, 5(4), 193-198. https://doi.org/10.3970/icces.2008.005.193
Vancouver Style
Aizawa T, Akebono H, H.Suzuki . The tribological and fatigue properties of steel modified by hybrid surface modification combining super rapid induction heating & quenching and DLC coating. Int Conf Comput Exp Eng Sciences . 2008;5(4):193-198 https://doi.org/10.3970/icces.2008.005.193
IEEE Style
T. Aizawa, H. Akebono, and H.Suzuki, “The Tribological and Fatigue Properties of Steel modified by Hybrid Surface Modification combining Super Rapid Induction Heating & Quenching and DLC coating,” Int. Conf. Comput. Exp. Eng. Sciences , vol. 5, no. 4, pp. 193-198, 2008. https://doi.org/10.3970/icces.2008.005.193



cc Copyright © 2008 The Author(s). Published by Tech Science Press.
This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • 1362

    View

  • 874

    Download

  • 0

    Like

Share Link