Open Access

ABSTRACT

On a novel mechanical press for precision cutting

Wen- Hsiang Hsiang¹, Kuen-Ming Shu², Chia-Heng Tsai¹

1 Department of Automation Engineering, National Formosa University, Yunlin 632, Taiwan, ROC
2 Department of Mechanical and Computer Aided Engineering, National Formosa University,Yunlin 632, Taiwan, ROC

The International Conference on Computational & Experimental Engineering and Sciences 2009, 11(3), 75-76. https://doi.org/10.3970/icces.2009.011.075

Abstract

The objective of this paper is to propose a novel mechanical press with six-links, and to verify its feasibility in precision cutting. First, the system is presented and its advantages are discussed. Then, the kinematic analysis of the system is obtained by examining the geometry of the design. Furthermore, the optimization approach for the design is presented. Finally, a design example is given to verify the feasibility of the design by conducting computer simulation. All the above analysis and design are illustrated by using a 6-bar linkage. The results shown that the developed system is feasible and of high potential to be applied to a press for precision cutting.

---