Open Access
ABSTRACT
A study on a novel press of Stephen type
Department of Automation Engineering, National Formosa University, Yunlin 632, Taiwan, ROC
Department of Mechanical and Computer Aided Engineering, National Formosa University,Yunlin 632, Taiwan, ROC
The International Conference on Computational & Experimental Engineering and Sciences 2009, 11(1), 7-8. https://doi.org/10.3970/icces.2009.011.007
Abstract
The objective of this paper is to propose a novel press of Stephenson type, and verify its feasibility. First, the system is presented and its advantages are discussed. Then, the kinematic analysis of the system is obtained by examining the geometry of the design. Finally, a design example is given to verify the feasibility of the design by conducting computer simulation. All the above analysis and design are illustrated by using Stephenson type mechanism. The results show that the developed system is feasible and with high potential to be applied to a press for precision forming.Cite This Article
This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.