Open Access
ARTICLE
Performance Analysis of Optimization Based FOC and DTC Methods for Three Phase Induction Motor
Department of EEE, St. Xavier’s Catholic College of Engineering, Nagercoil, 629003, India
* Corresponding Author: V. Jesus Bobin. Email:
Intelligent Automation & Soft Computing 2023, 35(2), 2493-2511. https://doi.org/10.32604/iasc.2023.024679
Received 27 October 2021; Accepted 22 December 2021; Issue published 19 July 2022
Abstract
Three-phase induction motors are becoming increasingly utilized in industrial field due to their better efficiency and simple manufacture. The speed control of an induction motor is essential in a variety of applications, but it is difficult to control. This research analyses the three-phase induction motor’s performance using field-oriented control (FOC) and direct torque control (DTC) techniques. The major aim of this work is to provide a critical evaluation of developing a simple speed controller for induction motors with improving the performance of Induction Motor (IM). For controlling a motor, different optimization approaches are accessible; in this research, a Fuzzy Logic Controller (FLC) with Fractional Order Darwinian Particle Swarm Optimization (FODPSO) algorithm is presented to control the induction motor. The FOC and DTC are controlled using FODPSO, and their performance is compared to the traditional FOC and DTC technique. Each scheme had its own simulation model, and the results were compared using hardware experimental and MATLAB-Simulink. In terms of time domain specifications and torque improvement, the proposed technique surpasses the existing method.Keywords
Cite This Article
This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.