Open Access
ARTICLE
Research on Measuring Method of Crankshaft Based on Servo Control Mode
Liu Yangpeng1, Ding Jianjun1, Cao Jingshu2, Wang Zhen1, Jiang Zhuangde1
1 The State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an 710049, China
2 SHAANXI FAST GEAR CO.,LTD., Xi’an 710077, China
* Corresponding Author: Ding Jianjun,
Intelligent Automation & Soft Computing 2019, 25(4), 767-774. https://doi.org/10.31209/2019.100000080
Abstract
In the conventional measure process of crankshaft, the width of Abbe probe is
designed as more than double the eccentricity volume of crank. This even
causes the decline of test accuracy due to the probe distortion. This paper
proposes a type of servo control mode for measuring crankshaft based on the
four-axis motion system. Abbe probe is integrated with Axis motion system. It
feeds in a servo way. A mathematical model is developed to ensure the stable
contact between probe and workpiece during moving. The results show that,
the narrowed Abbe probe will move according to the journal position, thus
ensuring a correct contact of probe and journal. By the method, the automatic
detection of crankshaft parameters is achieved with high accuracy and
efficiency.
Keywords
Cite This Article
L. Yangpeng, D. Jianjun, C. Jingshu, W. Zhen and J. Zhuangde, "Research on measuring method of crankshaft based on servo control mode,"
Intelligent Automation & Soft Computing, vol. 25, no.4, pp. 767–774, 2019.