Submit

Login Login

Register Register

Home / Journals / FDMP / Online First / doi:10.32604/fdmp.2024.057056
Journal Menu
Special Issues
Table of Content

All issues

Online First

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Open Access

ARTICLE

Analysis of Fluid-Structure Interaction during Fracturing with Supercritical CO2

Jiarui Cheng1,*, Yirong Yang1, Sai Ye2, Yucheng Luo1, Bilian Peng1
1 Xi’an Key Laboratory of Wellbore Integrity Evaluation, Xi’an Shiyou University, Xi’an, 710065, China
2 CCDC Changqing Downhole Technology Company, China National Petroleum Corporation, Xi’an, 712042, China
* Corresponding Author: Jiarui Cheng. Email: email
(This article belongs to the Special Issue: Fluid and Thermal Dynamics in the Development of Unconventional Resources II)

Fluid Dynamics & Materials Processing https://doi.org/10.32604/fdmp.2024.057056

Received 07 August 2024; Accepted 25 September 2024; Published online 18 October 2024

Abstract

During the implementation of CO2 fracturing for oil and gas development, the force transfer effect caused by the unsteady flow of high-pressure CO2 fluid can lead to forced vibration of the tubing and ensuing structural fatigue. In this study, a forced vibration analysis of tubing under CO2 fracturing conditions is carried out by taking into account the fluid-structure coupling and related interaction forces by means of the method of characteristics (MOC). The results show that for every 1 m3/min increase in pumping displacement, the fluid flow rate increases up to 3.67 m/s. The flow pressure in the pipe tends to be consistent with the pumping pressure at the initial stage and then decreases with an increase in the pump starting time. When the pumping pressure increases by 10 MPa, the additional stress in the tubing increases by 11.8%, and the peak value of the additional stress at the bottom of the well is the largest. The temperature in the tubing grows with well depth, which causes a phase change in CO2 due to heat absorption. At this time the pressure in the tubing decreases, the fluid flow rate increases by about 1.12 m/s, and the additional stress grows by about 1.5 MPa.

Graphical Abstract

Analysis of Fluid-Structure Interaction during Fracturing with Supercritical CO<sub>2</sub>

Keywords

Supercritical CO2; fracturing; fluid-structure interaction; method of characteristics (MOC); vibration characteristics

  • 184

    View

  • 23

    Download

  • 0

    Like

Related articles
Copyright© 2024 Tech Science Press
© 1997-2024 TSP (Henderson, USA) unless otherwise stated

Share Link