Submit

Login Login

Register Register

Home / Journals / FDMP / Online First / doi:10.32604/fdmp.2024.056130
Journal Menu
Special Issues
Table of Content

All issues

Online First

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Open Access

ARTICLE

Assessment of Carboniferous Volcanic Horizontal Wells after Fracturing Based on Gray Correlation, Hierarchical Analysis and Fuzzy Evaluation

Junwei Han1, Guohua Li1, Wu Zhong1, Yuchen Yang1, Maoheng Li2,3, Zhiwei Chen2,3, Ruichang Ge2,3, Lijuan Huang2,3,*
1 No.1 Oil Production Plant of Xinjiang Oilfield, Karamay, 834000, China
2 Hubei Key Laboratory of Oil and Gas Drilling and Production Engineering (Yangtze University), Wuhan, 430100, China
3 School of Petroleum Engineering, Yangtze University, Wuhan, 430100, China
* Corresponding Author: Lijuan Huang. Email: email

Fluid Dynamics & Materials Processing https://doi.org/10.32604/fdmp.2024.056130

Received 15 July 2024; Accepted 12 September 2024; Published online 25 September 2024

Abstract

A comprehensive method to evaluate the factors affecting the production capacity of horizontal wells in Carboniferous volcanic rocks after fracturing is investigated. A systematic approach combining gray correlation analysis, hierarchical analysis and fuzzy evaluation is proposed. In particular, first the incidence of reservoir properties and fracturing parameters on production capacity is assessed. These parameters include reservoir base geological parameters (porosity, permeability, oil saturation, waterproof height) as well as engineering parameters (fracture half-length, fracture height, fracture conductivity, fracture distance). Afterwards, a two-by-two comparison judgment matrix of sensitive parameters is constructed by means of hierarchical analysis, and the weighting coefficients of the factors are determined, where oil saturation, fracture conductivity and fracture half-length are weighted higher. Finally, the horizontal wells in the target block are categorized in terms of production capacity based on the fuzzy evaluation method, and split accordingly into high-producing, relatively high-producing, medium-producing and low-producing wells. Such a categorization is intended to provide parametric guidance for reservoir fracturing and modification.

Keywords

Fracturing parameter; horizontal well; grey correlation; hierarchical analysis; fuzzy evaluation; productivity evaluation

  • 136

    View

  • 25

    Download

  • 0

    Like

Related articles
Copyright© 2024 Tech Science Press
© 1997-2024 TSP (Henderson, USA) unless otherwise stated

Share Link