Submit

Login Login

Register Register

Home / Journals / FDMP / Online First / doi:10.32604/fdmp.2024.051418
Journal Menu
Special Issues
Table of Content

All issues

Online First

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Open Access

ARTICLE

Study on Optimal Water Control Methods for Horizontal Wells in Bottom Water Clastic Rock Reservoirs

Xianghua Liu1, Hai Song1, Lu Zhao1, Yan Zheng1, Neng Yang2, Dongling Qiu2,*
1 Sinopec Northwest Oilfield Branch, Northwest Oilfield Branch of China Petroleum and Chemical Corporation, Urumqi, 830011, China
2 School of Petroleum and Natural Gas Engineering, Southwest Petroleum University, Chengdu, 610500, China
* Corresponding Author: Dongling Qiu. Email: email
(This article belongs to the Special Issue: Fluid and Thermal Dynamics in the Development of Unconventional Resources II)

Fluid Dynamics & Materials Processing https://doi.org/10.32604/fdmp.2024.051418

Received 05 March 2024; Accepted 20 June 2024; Published online 25 July 2024

Abstract

The segmented water control technology for bottom water reservoirs can effectively delay the entry of bottom water and adjust the production profile. To clarify the impact of different methods on horizontal well production with different reservoir conditions and to provide theoretical support for the scientific selection of methods for bottom water reservoirs, a numerical simulation method is presented in this study, which is able to deal with wellbore reservoir coupling under screen tube, perforation, and ICD (Inflow Control Device) completion. Assuming the geological characteristics of the bottom-water conglomerate reservoir in the Triassic Formation of the Tahe Block 9 as a test case, the three aforementioned completion methods are tested to predict the transient production characteristics. The impact of completion parameters, reservoir permeability, bottom-water energy, and individual well control on the time to encounter water in horizontal wells (during a water-free production period) is discussed. A boundary chart for the selection of completion methods is introduced accordingly. The results show that the optimized ICD completion development effect for heterogeneous reservoirs is the best, followed by optimized perforation completion. Permeability is the main factor affecting the performances of completion methods, while bottom water energy and single well controlled reserves have a scarce impact. The average permeability of the reservoir is less than 500 mD, and ICD has the best water control effect. If the permeability is greater than 500 mD, the water control effect of perforation completion becomes a better option.

Keywords

Completion method; bottom water; low-permeability oil reservoir; horizontal well; development effect

  • 20

    View

  • 5

    Download

  • 0

    Like

Related articles
Copyright© 2024 Tech Science Press
© 1997-2024 TSP (Henderson, USA) unless otherwise stated

Share Link