Open Access iconOpen Access

ARTICLE

Optimal Configuration Method for Multi-Type Reactive Power Compensation Devices in Regional Power Grid with High Proportion of Wind Power

Ying Wang1, Jie Dang1, Cangbi Ding2,*, Chenyi Zheng2, Yi Tang2

1 Central China Branch of State Grid, Wuhan, 430077, China
2 School of Electrical Engineering, Southeast University, Nanjing, 211100, China

* Corresponding Author: Cangbi Ding. Email: email

Energy Engineering 2024, 121(11), 3331-3353. https://doi.org/10.32604/ee.2024.052066

Abstract

As the large-scale development of wind farms (WFs) progresses, the connection of WFs to the regional power grid is evolving from the conventional receiving power grid to the sending power grid with a high proportion of wind power (WP). Due to the randomness of WP output, higher requirements are put forward for the voltage stability of each node of the regional power grid, and various reactive power compensation devices (RPCDs) need to be rationally configured to meet the stable operation requirements of the system. This paper proposes an optimal configuration method for multi-type RPCDs in regional power grids with a high proportion of WP. The RPCDs are located according to the proposed static voltage stability index (VSI) and dynamic VSI based on dynamic voltage drop area, and the optimal configuration model of RPCDs is constructed with the lowest construction cost as the objective function to determine the installed capacity of various RPCDs. Finally, the corresponding regional power grid model for intensive access to WFs is constructed on the simulation platform to verify the effectiveness of the proposed method.

Keywords


Cite This Article

APA Style
Wang, Y., Dang, J., Ding, C., Zheng, C., Tang, Y. (2024). Optimal configuration method for multi-type reactive power compensation devices in regional power grid with high proportion of wind power. Energy Engineering, 121(11), 3331-3353. https://doi.org/10.32604/ee.2024.052066
Vancouver Style
Wang Y, Dang J, Ding C, Zheng C, Tang Y. Optimal configuration method for multi-type reactive power compensation devices in regional power grid with high proportion of wind power. Energ Eng. 2024;121(11):3331-3353 https://doi.org/10.32604/ee.2024.052066
IEEE Style
Y. Wang, J. Dang, C. Ding, C. Zheng, and Y. Tang, “Optimal Configuration Method for Multi-Type Reactive Power Compensation Devices in Regional Power Grid with High Proportion of Wind Power,” Energ. Eng., vol. 121, no. 11, pp. 3331-3353, 2024. https://doi.org/10.32604/ee.2024.052066



cc Copyright © 2024 The Author(s). Published by Tech Science Press.
This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • 470

    View

  • 102

    Download

  • 0

    Like

Share Link