Table of Content

Open Access iconOpen Access

ARTICLE

Control Mechanism of Surface Subsidence and Overburden Movement in Backfilling Mining based on Laminated Plate Theory

Zhengzheng Cao1, Feng Du2,3,4, Ping Xu1, Haixiao Lin1, Yi Xue3, Yuejin Zhou3

School of Civil Engineering, Henan Polytechnic University, Jiaozuo 454000, China.
School of Energy and Engineering, Henan Polytechnic University, Jiaozuo 454000, China.
State Key Laboratory of Coal Resources and Safe Mining, State Key Laboratory for Geomechanics & Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China.
Corresponding author: Feng Du. Tel.: +86 18639168883. E-mail address: dufeng@hpu.edu.cn.

Computers, Materials & Continua 2017, 53(3), 175-186. https://doi.org/10.3970/cmc.2017.053.187

Abstract

The backfilling mining technology is a type of high-efficiency coal mining technology that is used to address the environmental issues caused by the caving mining technology. In this paper, the mechanical model of symmetrical laminated plate representing the overburden movement caused by the backfilling mining technology is established, and the governing differential equation of the motion of the overburden is derived. The boundary conditions of the mechanical model are put forward, and the analytical solution of the overburden movement and surface subsidence is obtained. The numerical model of the overburden movement and surface subsidence, under mining with backfilling, is established by means of the FLAC3D numerical software, which aims to systematically study the influence of backfilling compactness, mining thickness, and mining depth on the overburden movement and surface subsidence in backfilling mining. When the compactness η is less than 70%, the overburden movement and surface subsidence is greater, while when η is greater than 70%, the overburden movement and surface subsidence is reduced significantly. On this basis, the control mechanism of surface subsidence and overburden movement in backfilling mining is obtained. The suitable backfilling compactness is the key to controlling surface subsidence and overburden movement in backfilling mining.

Keywords


Cite This Article

Z. . Cao, F. . Du, P. . Xu, H. . Lin, Y. . Xue et al., "Control mechanism of surface subsidence and overburden movement in backfilling mining based on laminated plate theory," Computers, Materials & Continua, vol. 53, no.3, pp. 175–186, 2017.



cc This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • 1578

    View

  • 1222

    Download

  • 0

    Like

Share Link