Books & Treatises


图片2.png

Recent Advances in Short-term Wind Power Forecasting: Modeling Methods and Real-world Data

Edited by Haijian Shao, Xing Deng, Yaming Ren, Xia Wang, Lu Zhang

Energy is an essential material basis for human social progress and economic development. Traditional energy such as coal, oil and 

gases has not only limited quantity -but also brings potential pollution to the human survival environment. In the past decades, the 

social development is affected by the oil crisis and various climate change factors, so the development of renewable energy ideas 

gradually becomes the consensus of the international community. more >>>



图片1.png

Molecular & Cellular Biomechanics In Honor of The 100th Brithday of Professor Yuan-Cheng Fung

Edited by Shu Chien, Dalin Tang, Andrew D. McCulloch, Jay D. Humphrey, Roger D. Kamm

Professor Yuan-Cheng Fung is widely regarded as a founding figure of bioengineering, tissue engineering, and the "Founder of Modern Biomechanics. On the marvelous occasion of Professor Fung's 100th Birthday, many of the world-leaders and the outstanding young 

scholars in science and engineering have contributed to Molecular & Cellular Biomechanics, to express their gratefulness and 

congratulations to Professor Fung. The present book is a tribute from the Journal of “Molecular Cellular Biomechanics”. more >>>



3.jpg

Contact Mechanics in the Engineering Sciences- Material Characterization

Micromechanical Processes & Modelling Geosciences

Edited by A.P.S. Selvadurai and S. N. Atluri

The study of mechanics of contact has evolved as a legitimate field in the engineering sciences, where advanced mathematical concepts 

in modeling are combined with innovative solution schemes that involve both analytical and computational approaches. The subject 

matter is also being applied to a variety of problem areas in the engineering sciences including, tribology, wear, mechanics of tactile 

sensors, biomechanics, geomechanics and earth sciences, material fragmentation, environmental sciences, micro-mechanics, materials 

engineering, smart sensors and the nano-sciences. more >>>


4.jpg

Recent Studies in Meshless & Other Novel Computational Methods

Edited by Bozidar Sarler and S. N. Atluri

Meshless methods belong to one of the most progressively developed aspects of computer modeling in engineering and sciences. 

Therefore, the number of new results in this field is growing significantly during the past few years. It is a natural need to consolidate 

these results in to Monographs of this type, to promote the further development of meshless methods.

more >>>



5.jpg

Advances in The MLPG Meshless Methods

Edited by Satya N. Atluri and Jan Sladek

Meshless methods belong to one of the most progressively developed aspects of computer modeling in engineering and sciences.
Therefore, the number of new results in this field is growing significantly during the past few years. It is a natural need to consolidate

these results in to Monographs of this type, to promote the further development of meshless methods. 

more >>> 



6.jpg

Transformational Army Science and Technology- Charting the future of S&T for the Soldier

Edited by John A. Parmentola and A.M. Rajendran

The 25th Army Science Conference (the 25th ASC) was held November 27-30, 2006, in Orlando, Florida under the auspices of the 

Assistant Secretary of the Army for Acquisition, Logistics and Technology. This silver anniversary conference celebrated 50 years 

of U.S. Army sponsorship of innovative S&T for our Soldiers and marked a significant milestone for the U.S. Army S&T community. 

more >>> 



7.jpg

CDROM: Transformational Army Science and Technology- Charting the future of S&T for the Soldier

Edited by John A. Parmentola and A.M. Rajendran

The 25th Army Science Conference (the 25th ASC) was held November 27-30, 2006, in Orlando, Florida under the auspices of the 

Assistant Secretary of the Army for Acquisition, Logistics and Technology. This silver anniversary conference celebrated 50 years 

of U.S. Army sponsorship of innovative S&T for our Soldiers and marked a significant milestone for the U.S. Army S&T community. 

more >>> 


8.jpg

Molecular & Cellular Biomechanics

Edited by P. Tong and S. N.Atluri

Professor Fung has rightfully earned a place in history, as the father of modern biomechanics. It is our great fortune to be associated 

with him. It is also a great fortune for the Journal, “MCB: Molecular & Cellular Biomechanics” to have Professor Fung as its 

Honorary Editor. We are heartened that many of the world-leaders in science and engineering have contributed to this volume, and 

to MCB, to pay their tributes to Professor Fung on his 90th birthday. more >>> 


9.jpg

Czochralski Growth of Oxide Crystals: Numberical Simulation and Experiments

Edited by Jyotirmay Banerjee and K. Muralidhar

A mathematical model that explores the basic transport phenomena in a Czochralski process, their interaction and influence on the 

growth of high quality oxide crystals are presented. Steady state simulation has been carried out for the full Czochralski domain 

including the melt. more >>> 



10.jpg

ADVANCES IN MESHLESS METHODS

Edited by J. Sladek & V. Sladek

Meshless methods belong to one of the most progressively developed part of the computational mechanics. These methods are 

increasingly applied to many fields of engineering and sciences. Therefore, the number of new results in this field is growing 

significantly during the past few years. more >>> 


11.jpg

Eddy Current Canonical Problems (with Applications to Nondestructive Evaluation)

Edited by Theodoros P. Theodoulidis and Epameinondas E. Kriezis

In this monograph a number of canonical problems in electromagnetic induction with applications to eddy current nondestructive 

evaluation are examined. The geometries involve a source in the form of a coil and a conductor in the form of a planar specimen. 

Analytical methods and scalar potentials are used throughout and emphasis is put on the method of truncated region eigenfunction 

expansions (TREE). more >>> 


12.jpg

METHODS OF COMPUTER MODELING IN ENGINEERING & THE SCIENCES, VOL. 1

Edited by Satya N. Atluri

The present book is on the evolving discipline of Computer Modeling in Engineering & the Sciences. It presents, for the first time, a 

unified treatment of a variety of computer modeling strategies, including: Collocation Method, Sub-domain Method, Finite Volume 

Method; Finite Element Method; Field/Boundary Element Method; The Meshless Local Petrov-Galerkin (MLPG) Method for Domain 

& Boundary Discretizations; Boundary Methods for certain linear problems, etc. more >>> 


13.jpg

The Meshless Method (MLPG) for Domain & BIE Discretization

Edited by Satya N. Atluri

In the intervening two years, much has been accomplished by a number of researchers world-wide, in the further development & 

application of the meshless method (MLPG) to problems in three-dimensional solid mechanics, beams, plates and shells; and in the 

seamless modeling of multi-scale phenomena in nano and micro engineering. 

more >>> 



14.jpg

Theory of Edge Diffraction of Electromagnetics

Edited by Pyotr Ya. Ufimtsev

This monograph is mainly connected with Research on edge diffracted waves. This research stemmed from practical considerations 

and focused on the development of approximate methods to calculate the scattering of electromagnetic waves from real objects. 

more >>> 



15.jpg

Structural Integrity & Durability

Edited by Satya N.Atluri

"Structural Integrity and Durability contains a wealth of useful information and is an excellent reference book for engineers working 

in this area. All engineering libraries should have a copy available for its patrons." more >>>

– Applied Mechanics Reviews, Vol. 51, No. 1, 1998



16.jpg

The Meshless Local Petrov-Galerkin (MLPG) Method

Edited by S. N.Atluri, S. Shen

This book is the first monograph (in the new series, CREST), on this new class of meshless methods, that are expected to 

revolutionalize engineering/science analyses. It not only deals with several meshless methods in general, but also ... 

more >>>



17.jpg

Design-Sensitivity Analysis

Edited by M. Kleiber, T. Hisada

This book plays an important role in the concurrent engineering design of mechanical devices and structures. Eleven articles, written by 

leading researchers in the field, consider the relationship between structural mechanics problems and the design variables available to 

the analyst... more >>>


18.jpg

Inverse Problems

Edited by Shiro Kubo

Many problems in science and engineering, as well as many design problems, can be classified as inverse problems. To help solve such 

problems, researchers around the world have been increasing their efforts to advance the field. This monograph contains many of those 

important and recent contributions on inverse problems... more >>>


19.jpg

Durability of Metal Aircraft Structures

Edited by S. N. Atluri, C. E. Harris, A. Hoggard, N. Miller, S. G. Sampath

This monograph contains expanded written versions of the research work presented by a group of internationally-known experts on the 

subject of materials degradation and aging of aircraft structures ... more >>>