Table of Content

Open Access iconOpen Access

ARTICLE

Arrangement of Monomer Injection in the Characteristics of Copolymer

Mohsen Ghorbani1, Hossein Eisazadeh2

Babol University of Technology, P.O.Box 484, Babol, Iran
Chemical Engineering Department, Babol University of Technology, P.O.Box 484, Babol, Iran

Fluid Dynamics & Materials Processing 2010, 6(2), 153-164. https://doi.org/10.3970/fdmp.2010.006.153

Abstract

Polypyrrole/Poly(vinyl acetate) (PPy/PVAc) copolymer was prepared by the copolymerization of vinyl acetate and pyrrole using FeCl3and benzoylperoxide as an oxidant in the presence of various surfactants such as sodium dodecylbenzenesulfonate and poly(ethylene glycol) in the aqueous/non-aqueous media. The PPy/PVAc copolymer was characterized in terms of conductivity, morphology, chemical structure, particle size and yield. The results indicate that the morphology, particle size, yield and electrical conductivity of the products are dependent on the type of surfactant and the arrangement of monomer injection. The chemical structure of obtained product was determined by FTIR spectroscopy. By comparison FTIR spectra between pure PPy and PPy/ PVAc copolymer, the PPy/ PVAc copolymer had additional bands. All these bands indicate the formation of copolymer.

Keywords


Cite This Article

Ghorbani, M., Eisazadeh, H. (2010). Arrangement of Monomer Injection in the Characteristics of Copolymer. FDMP-Fluid Dynamics & Materials Processing, 6(2), 153–164.



cc This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • 1452

    View

  • 1308

    Download

  • 0

    Like

Share Link