Table of Content

Open Access iconOpen Access

ARTICLE

A New Combined Scheme of Discrete Element Method and Meshless Method for Numerical Simulation of Continuum/Discontinuum Transformation

Li Shan, Ning Cui, Ming Cheng, Kaixin Liu

Computer Modeling in Engineering & Sciences 2012, 83(4), 353-384. https://doi.org/10.3970/cmes.2012.083.353

Abstract

In the present paper, a combined scheme of discrete element method (DEM) and meshless method for numerical simulation of impact problems is proposed. Based on the basic principle of continuum mechanics, an axisymmetric DEM framework is established for modeling the elastoplastic behavior of solid materials. Failure criteria are introduced to model the transformation from a continuum to a discontinuum. The friction force between contact elements is also considered after the failure appears. So our scheme can calculate not only the behavior of continuum and discontinuum, but also the transformation process from a continuum to a discontinuum. In addition, a meshless interpolation method is adopted to calculate the strain tensor, which is a non-local data fitting algorithm, and certain strain and stress measures are defined. Numerical simulations are carried out to validate our scheme. The numerical results agree well with those obtained by the finite element method (FEM) and the corresponding experiment respectively, which proves the feasibility and reliability of our computational scheme for analyzing the impact problems.

Keywords


Cite This Article

Shan,, L. (2012). A New Combined Scheme of Discrete Element Method and Meshless Method for Numerical Simulation of Continuum/Discontinuum Transformation. CMES-Computer Modeling in Engineering & Sciences, 83(4), 353–384.



cc This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • 1155

    View

  • 982

    Download

  • 0

    Like

Share Link