Open Access
ARTICLE
An Analysis of the Transient Heat Conduction for Plates with the Functionally Graded Material Using the Hybrid Numerical Method
School of Mechatronic Engineering, Xi’an Technological University, Xi’an, 710032, China, Email: carl8@163.com
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, 410082, China
Civil Engineering College of Hunan University of Science and technology, Xiangtan, 411201, China
Computer Modeling in Engineering & Sciences 2010, 63(2), 101-116. https://doi.org/10.3970/cmes.2010.063.101
Abstract
A transient heat conduction analysis of the functionally graded material (FGM) plates has been investigated based on the hybrid numerical method (HNM). HNM combines the layer element method with the method of Fourier transforms and proves to be efficient and reliable. The FGM plates are infinite large and the material properties vary continuously through thickness. The transient heat source acted on the FGM plates. The temperature distribution of the FGM plates is obtained in different time and different position. Some useful results for transient heat conduction are shown in figures. Applications of HNM to transient heat conduction are firstly presented a new way for studying the transient heat conduction problems.Keywords
Cite This Article
![cc](https://www.techscience.com/static/images/cc.jpg?t=20230215)
This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.