Table of Content

Open Access iconOpen Access

ARTICLE

crossmark

Mechanical Properties and Stress Strain Relationship Models for Bamboo Scrimber

Haitao Li1,*, Huizhong Zhang1, Zhenyu Qiu1, Jingwen Su2, Dongdong Wei3, Rodolfo Lorenzo4, Conggan Yuan3, Hongzheng Liu5, Chungui Zhou6

1 College of Civil Engineering, Nanjing Forestry University, Nanjing, 210037, China
2 Nanjing Technical Vocational College, Nanjing, 210019, China
3 Jiangxi Feiyu Bamboo Stock Co. Ltd., Fengxin, 330700, China
4 University College London, London, WC1E 6BT, UK
5 Hangzhou Dasuo Technology Co. Ltd., Hangzhou, 311251, China
6 Hangzhou Runzhu Technology Co. Ltd., Hangzhou, 311200, China

* Corresponding Author: Haitao Li. Email: email

Journal of Renewable Materials 2020, 8(1), 13-27. https://doi.org/10.32604/jrm.2020.09341

Abstract

In order to investigate the basic mechanical properties and stress strain relationship model for bamboo scrimber manufactured based on a new technique, a large quantities of experiments have been carried out. Based on the analysis of the test results, the following conclusions can be drawn. Two main typical failure modes were classified for bamboo scrimber specimens both under tension parallel to grain and tension perpendicular to grain. Brittle failure happened for all tensile tests. The slope values for the elastic stages have bigger discreteness compared with those for the specimens under tensile parallel to grain. The failure modes for bamboo scrimber specimens under compression parallel to grain could be divided into four. Only one main failure mode happened both for the bending specimens and the shear specimens. With the COV values of 28.64 and 25.72 respectively, the values for the strength and elastic modulus under tensile perpendicular to grain have the largest discreteness for bamboo scrimber. From the point of CHV values, the relationship among the mechanical parameters for bamboo scrimber were proposed based on the test results. Compared with other green building materials, bamboo scrimber manufactured based on a new technique has better mechanical performance and could be used in construction area. Three stress strain relationship models which are four-linear model, quadratic function model, and cubic function model were proposed for bamboo scrimber specimens manufactured based on a new technique. The latter two models gives better prediction for stress strain relationship in elastic plastic stage.

Keywords


Cite This Article

Li, H., Zhang, H., Qiu, Z., Su, J., Wei, D. et al. (2020). Mechanical Properties and Stress Strain Relationship Models for Bamboo Scrimber. Journal of Renewable Materials, 8(1), 13–27.

Citations




cc This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • 8065

    View

  • 4913

    Download

  • 1

    Like

Share Link